HMR Posted May 7, 2013 Share Posted May 7, 2013 Can someone help me to identify a couple of switches on my CH , the one to the left of the speed control on off switch and the one on the end of the indicator stork, the labels have gone and I have never used them.Cheers Quote Link to comment Share on other sites More sharing options...
wastenafarmtrucking Posted May 7, 2013 Share Posted May 7, 2013 with out a pic I'm going off of a bad memory.....The one on the end of the indicator stalk is for the high beam flash....The one to the left of the cruise is either the shut down over ride or if you have a sleeper it is supposed to shut the fridge off.Going off my memory of my 01' Vision Quote Link to comment Share on other sites More sharing options...
bbigrig Posted May 7, 2013 Share Posted May 7, 2013 End of the signal stock is your clearance light flash (will flash trailer clearance lights aswell) The cruise buttons are usually the buttons as far as left can be on the lower line of switches. Your high beam is in the center of the stock arm and made to be pushed with your thumb.This would be based on CH interiors from 1990-1999.Anything late 1999 and up is the "Keystone interior" which is the same as the Vision interior until 2007. I believe from memory is as far left as possible in the center row.I think the unmarked dash button you ask about is the accel/decel button. push up and it accels the set speed. push down it sets the speed or decels the set cruise. I just realized your truck is down under That changes the button positions on the dash all together.......DOOOOHHHH Quote Link to comment Share on other sites More sharing options...
HMR Posted May 15, 2013 Author Share Posted May 15, 2013 you are correct with the clearance lamps, here is the other one im not sure of Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.