Bobby Covert Posted January 12, 2013 Share Posted January 12, 2013 With the temperatures in the mid 60's I headed down to work on my old Mack today. I was hoping to put an end to a power steering leak that has plagued the truck since I bought it. After running the engine for a little while I noticed a "stripe " of oil on my plywood under the truck.I also noticed oil on my belts, fuel filter and passenger side fender. I am thinking the main seal is shot? What are your opinions of this. Could it be something else that is easier to fix? With the V8 gone and the longer 237 in line 6 block it is very tight under there near the radiator. The seal is about $25 , yet the radiator and fenders will just about have to come off to do this repair . UGH! no wonder the tilt hood was designed! Quote Link to comment Share on other sites More sharing options...
tkobes43 Posted January 12, 2013 Share Posted January 12, 2013 Thats a good looking truck! To bad the V8 is gone, would be one SWEET sounding B Model!!!Good luck on the repairs, and sorry as i am no help!! LOLTom Quote "Nothing Breaks Wind Like A Bulldog" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.