LocomotiveBreath Posted December 30, 2012 Share Posted December 30, 2012 Looking for an standard upright shifter to fit a Mack 2050 transmission. The mounting bolt holes are about 3" center to center.Thanks Quote Link to comment Share on other sites More sharing options...
LocomotiveBreath Posted January 1, 2013 Author Share Posted January 1, 2013 I just looked again and there is a second bolt pattern on the top plate which measures approximately 6" x 4.5" center to center. I believe this the standard big bolt pattern shift tower but I don't have one around to verify it.Thanks Quote Link to comment Share on other sites More sharing options...
smorse54 Posted January 3, 2013 Share Posted January 3, 2013 Is this what you have in mind? This is 2 piece design . Steve Quote Link to comment Share on other sites More sharing options...
LocomotiveBreath Posted January 3, 2013 Author Share Posted January 3, 2013 It might work. How does the upper piece attach to the lower piece? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.