cschaeffer6 Posted October 4, 2012 Share Posted October 4, 2012 hello i have a truck with a bad cam. Does anyone have info on changing the cam. Is It a major project or should i swap it out since i have a good etech 350. thanks. Quote Link to comment Share on other sites More sharing options...
staxx Posted October 4, 2012 Share Posted October 4, 2012 It is a big project but with the rite tools it can take 10-14 to do dealership will charge 18hours need to make sure cam is the only issue sometimes bad cam can lead to alot of other damage h-rings, valve train etc. Quote Link to comment Share on other sites More sharing options...
dds92780 Posted October 4, 2012 Share Posted October 4, 2012 its about a 3000 dollar job Quote Slow and Steady Wins the Race! Link to comment Share on other sites More sharing options...
rsb502 Posted October 6, 2012 Share Posted October 6, 2012 The 2000,01,02 427 Etech engines were cam getters, its a common job to put a cam in em, like Staxx said check the valve train most of the time they get a valve or something else when they go, at any rate most reputable shops have probably done one before and have the stuff to do it again. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.