Jump to content

cschaeffer6

Puppy Poster
  • Content Count

    8
  • Joined

  • Last visited

Community Reputation

0 Neutral

About cschaeffer6

  • Rank
    Engine Started

Previous Fields

  • Make
    mack
  • Model
    ch613
  • Year
    1995

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I have an 01 mack ch613 e7 427 with a bad cam. I also have a 01 mack 350hp engine in a wrecked truck. Should I repair cam or swap engine? Thanks
  2. i have a 1995 mack ch613 e-7 427. it has 399k miles on it. it recently started blowing coolant from overflow bottle until it would run low and overheat. i recently changed radiator, hoses, thermostat with no change. any ideas would be a great help. the truck also starts right up and runs great.
  3. hello i have a truck with a bad cam. Does anyone have info on changing the cam. Is It a major project or should i swap it out since i have a good etech 350. thanks.
  4. could someone help me with a procedure on adjusting my valves. they are way out. thank again everyone.
  5. do i have to buy the clutch from mack it is e7-427 with a eaton 10 speed. the difference they said is a mack clutch has 9 springs in the pressure plate and most have 7 .thanks
  6. HELLO, I HAVE A `95 MACK CH613 WITH A E7-427 AND A 10 SPEED TRANS. THE TRANSMISSION BLEW APART AND I HAVE TO REMOVE IT. WHAT IS THE BEST WAY TO SUPPORT THE ENGINE WHEN I REMOVE THE TRANSMISSION. ALL HELP WOULD BE GREAT. THANKS IN ADVANCE
  7. it never did this before. its a loud clunking noise. is there a fix.
  8. when i start my 95 mack ch e7 427. the fan is on and clunks. if i can jump the wire to shut it off but i cant find diagnostics to see why the fan is on when cold any help would be great.
×
×
  • Create New...