David Posted August 23, 2012 Share Posted August 23, 2012 No steps. Just the bumper. No depressions where it bolts. I have a 23'4" chassis from B85f1153.Thanks. Call me anytime @ 919_932_3344. Quote Link to comment Share on other sites More sharing options...
rsb502 Posted August 24, 2012 Share Posted August 24, 2012 RE: Rick Harper's comments, I would recommend a place in Nashville called Advanced Plating (http://www.advancedplating.com/). I have been to their shop and they do great work stripping bumpers and re-plating, just need to make sure their plating tanks fit the bumper. I think they can handle set-forward axle flat bumpers like the Superliner but probably not set-backs like a CH. Advanced is not cheap, though.Advanced is too high and hard to deal with now they have gotten pretty uppitty over the last few years, I would be intersted in a 18"or20" boxed end square, wide step hole (factory size) 4" down from the top, drilled for a tag holder above the step hole, no light or tow pin holes for an 85 Superliner II, its the same truck as in this thread. call or email me 615-631-1775 rsb502@gmail.com thanks. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.