Lmackattack Posted August 7, 2012 Share Posted August 7, 2012 What is the standard off set for a budd rim... I want alum front budds and see there are different offsets. Currently I have steel budds and want to make sure I keep them all the same offsets Quote Link to comment Share on other sites More sharing options...
David Posted August 7, 2012 Share Posted August 7, 2012 Trent, There is a lot of info on the Alcoa and Accuride websites. Quote Link to comment Share on other sites More sharing options...
rsb502 Posted August 7, 2012 Share Posted August 7, 2012 if you want to make sure its the same, yank one of yours off (sorry lol) then put a straifghtedge across the back and measure to the mounting surface, then subtract half the width of the wheel 8.25" wheels would be 4.125" that gives you the inset which is how alcoa measures their wheels. There are a bunch of different wheel insets out there and thats the only way I know of to be sure you get the same wheel if you cant read the factory p/n on the wheel, if you can find that just look it up. Alcoa p/n 88311 is a 10 hole stud pilot with 5.68 inset, p/n 88361 has 5.81 so its just about an 1/8 inch difference (.13", 1/8 is .125"). I hope that helps. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.