bwillcutt Posted July 2, 2012 Share Posted July 2, 2012 hello i'm looking at a mack tri axle dump its a 2003 rd600 glider kit with 17 foot body the specs are e6 300 motor 2060 transmission and 6-34 rear end ratio w[11.24.5 tires is that a pretty good setup? i'm not familliarwith the 2060 transmission and 634 rear end would that have a good low gear and still have good top end? Quote Link to comment Share on other sites More sharing options...
MACKS Posted July 2, 2012 Share Posted July 2, 2012 6.34 would be slow even with an overdrive trans,someone on here might be able to figure it out for you. Quote Link to comment Share on other sites More sharing options...
bwillcutt Posted July 2, 2012 Author Share Posted July 2, 2012 That's what I was concerned about 2060 transmisson is .60 overdrive I think but doesn't have a low gear not lIke the old 6 speed Quote Link to comment Share on other sites More sharing options...
rsb502 Posted July 29, 2012 Share Posted July 29, 2012 with .60 od and 11r24.5 @43in diameter that makes it about 60.5 mph @1800 so its pretty low. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.