Jump to content

R600 Info Needed


Recommended Posts

Gday, firstly does anyone know what the chassis no R611RT3311 would be for, as in what set up it left the factory and what year it would be. definately a flintsone model, am guessing originally it had a C motor/quad set up.

secondly what model number and year gearbox (mack) had a single stick ten speed - is set up in standard 5 pattern with air actuated R - N - L - D. is reverse in all gears, neutral, low and direct? - does that mean no overdrive? not sure but any and all info would be appreciated.

cheers ellis

Link to comment
Share on other sites

Gday, firstly does anyone know what the chassis no R611RT3311 would be for, as in what set up it left the factory and what year it would be. definately a flintsone model, am guessing originally it had a C motor/quad set up.

secondly what model number and year gearbox (mack) had a single stick ten speed - is set up in standard 5 pattern with air actuated R - N - L - D. is reverse in all gears, neutral, low and direct? - does that mean no overdrive? not sure but any and all info would be appreciated.

cheers ellis

A R611RT would have had the ENDT673C,single drive axle,right hand steer.That's a fairly low number,'68 or '69 I'd guess.

If I remember right the ten speed you're refering to is the TRDL107.

Link to comment
Share on other sites

A R611RT would have had the ENDT673C,single drive axle,right hand steer.That's a fairly low number,'68 or '69 I'd guess.

If I remember right the ten speed you're refering to is the TRDL107.

thanks for that, yep fella said it was a 67' but is a bogie drive not single. ill look up info on that box no, thanks again.

Link to comment
Share on other sites

  • 2 weeks later...

Gday, firstly does anyone know what the chassis no R611RT3311 would be for, as in what set up it left the factory and what year it would be. definately a flintsone model, am guessing originally it had a C motor/quad set up.

secondly what model number and year gearbox (mack) had a single stick ten speed - is set up in standard 5 pattern with air actuated R - N - L - D. is reverse in all gears, neutral, low and direct? - does that mean no overdrive? not sure but any and all info would be appreciated.

cheers ellis

Hi Ellis,

R611RT, as Superdog said, ENDT673C, 250BHP, Quad trans and RAD5291 rear axle.

Its been converted to tandem, it was delivered in late 67.

Jeff.

Link to comment
Share on other sites

Hi Ellis,

R611RT, as Superdog said, ENDT673C, 250BHP, Quad trans and RAD5291 rear axle.

Its been converted to tandem, it was delivered in late 67.

Jeff.

no probs, must have been done early as spoke with second owner from 1974 and was bogie when he bought it, is long chassis so can only think they altered it in some way, looks to be original but who knows. Where do you find any and all info re these models?

thanks again Jeff

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...