Jump to content

John Paul

Puppy Poster
 View Profile  See their activity

  • Posts

    24

  • Joined

  • Last visited

 Content Type 

Everything posted by John Paul

  1. John Paul
    Sounds good to me. Thanks for the info.
  2. John Paul
    Yea cooler is bad. Replacing it in the morn. What should I use to flush oil from cooling system? Someone advised cascade. Would this hurt anything?
  3. John Paul
    Okay. Thanks for the reply.
  4. John Paul
    Any ideas?
  5. John Paul
    I've got oil in my water tank on firewall. Safe to say cooler is leaking, orwould this be more serious? 1,265,000 on a 2000 427. Hasen't been rebuilt.
  6. John Paul
    Gets straight to the point huh.
  7. John Paul
    I know it's a 427, but is it an AI or what. Would like to look at torque curve as well.
  8. John Paul
    Where can I find the specs for my engine??
  9. John Paul
    How's the new wagon workin for ya????
  10. John Paul
    I've got a 2000 CX613. Frame is just over 10". Don't know exact type, but it is hendrickson.
  11. John Paul
    I believe I've got smaller frame rails. Would I use the same measurement?
  12. John Paul
    Would this be the same as measuring from frame to top of axel??
  13. John Paul
    I've entertained the idea of replacing my 48' float with a drop deck. Have you noticed a rate differance yet?
  14. John Paul
    Ahhh, I see you finally delivered my boat. Thanks Bigun.
  15. John Paul
    Thanks HK, Is this a normal seal replacement, or would the pump need replaced?
  16. John Paul
    Hey guys, What would cause my power steering resovor to pressurize? It's not blowing dipstick out, rather seeping out of top. This is on a 2000 427 Vision. thanks.
  17. John Paul
    I've got a 2000 vision. There's a pressure swithc above brake pedal for this. Don't think it has anything to do with yellow vlv leaking. My switch just started leaking and big P stayed on.
  18. John Paul
  19. John Paul
    thanks, seems the cable guide, or whatever is pushing the window up is not moving freely.
  20. John Paul
    I have a 2000 vision with electric windows. Motor is shot. How would I manually get the window up?
  21. John Paul
    ok, thanks. i'll replace cable and let you guys know how it turns out.
  22. John Paul
    I disconnected the clutch cable, worked easy. The shaft through bellhousing and throughout is well greased. Still hard to press. Even blew air into clutch assembly, then drenched the clutch and pressure plate with a light oil, still no good result. I'm thinking there may only one other way to find this one.
  23. John Paul
  24. John Paul
    i have a 2000 vision 427. My clutch is adjusted, but it suddenly very hard to push the pedal. Any ideas?

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...