Steel Nose
-
Posts
18 -
Joined
-
Last visited
Steel Nose's Achievements
-
The whole headlight assembly is available from Mack part# 2MO46P3 for around $70
-
The bronze cam bushings are available thru Euclid part# E807
-
If you want to go with halogen the part # is H6024 available at most any auto or truck parts store
-
That double check valve is Mack part# 20QE2199R and Bendix part# 289296N both numbers are readily available
-
If you still need the answer this truck was built with an E6-350 2VH so 350hp
-
Truck Lite has an LED headlight to replace to standard round headlight used on that truck Part # 27275C
-
That should run off the accessory relay that powers all the cab, it is mounted behind the dash. if you pull the ashtray panel off top of dash you can get to it from there
-
If you are still looking for this part they are still available from Mack. current part number is 25019910
-
no pistons here either, sorry
-
G Mack next problem
Steel Nose replied to D2Denny's topic in Antique and Classic Mack Trucks General Discussion
How did things go at the spring shop today?? -
window regulator
Steel Nose replied to cpgeneration's topic in Exterior, Cab, Accessories and Detailing
If you're still needing that part number it is 48QS313A They are still available from Mack, this is for the scissor portion, the gear assembly is 48QS311 and is also still available -
G Mack next problem
Steel Nose replied to D2Denny's topic in Antique and Classic Mack Trucks General Discussion
I'm in Canton almost everyday and get to Mansfield area normally once a week if I can help out moving springs let me know -
As you can tell by my user name I love those steel nose RD's
-
Model is RD686S, And 7201 is the serial number
-
That truck was built 01/07/1980 That was before they were using the 17 digit vin numbers. ENDT676 engine (285hp) TRXL107 transmission (6 speed) 44,000 camel back suspension CRDPC92/CRD93 Carriers 4:17 ratio FA617C front axle Hope this helps
BMT Forum Logo
