mack mhe9

proably not going to sell those just in case fuel goes back to a dallor a gallon again, and if i dont see any improvement in fuel in a few months ill put the exaust back up, this thing looks like a chickin with no feathers, ha!

whats the story on the cl in this post? i think i saw that cl at antrim diesel a long time ago. could be very wrong though,

yea,i know, the shrink said it will wear off, still waiting, ha!

did you get your engine?

thanks it was noproblem

im looking to make some shields to cover the brackets

ive posted before, 875hp at 1800rpm, 2600lbs 1300rpm 1year and noproblems, 1500rpm at 60 gets low to mid 6mpg sted deck in the north east,im happy

if this helps also,i have the big bunk its got 6 mounts 3 perside, all these pics are from the pasenger side front to back,

glad your ok, im not an expert on high power electric and you said the computers fine i was also woundering about the wheel bearings, between the rollers and the races you would think any space would cause an ark, just wondering. but mostly glad your safe,

can we bring our trucks, or is it a personal show?

the one i had the longest was a70 340 at 3.91s threw the exhaust on street tires ran 11.36 at 119mph, car was driven every where was even in car carft mag once.

15 years old in 1983 bought a 68 road runner 383 at. 100dollars needed head gaskets, no pics. red with black int

amen

thers a nice 1981 f600 on ebay 2/3/2012 just letting you know

this realy doesnt help you, last year i replaced my t18 with a mack reman and like yours it sounded like a can of rocks, if youd get a load on it in low range you could find a spot with the throtle and keep the vibration and rock sound the hole rpm range all the way from 8-900 rpm to 18-1900rpm in any low range gear, thank god i let mack put it in, they replaced the new reman with a new new reman for free, and it was fixed, i asked a couple time if they herd anything back from mack no word, good luck.

lotta nice trucks

just reread this, tall 22.5 should be 41 inch tall times 2100 rpm= 86100 then div. by 336 div. by 4.89, div. by 60mph. that is a .87 od witch would be riight, if its got 4.56 init it comes out to .93 od i dont think thats a gear , hope it helps,

how tall's the tire from ground to to top 41ish

THATS TO COOL

How many inches high and wide is it.

Same hood on my 78 RL755L. I'd be interested in it for a spare. We need to talk on another matter too. Give me a call tomorrow sometime if you get a chance; 309-219-2070

Are you not going to build a "modern" RS now as you were thinking?

Rob

Are you selling the air cleaner?

i have an rs700l hood has the ridge in center, nice shape but will need work, i think its nos and wasn't on a truck, best sensabile offer,

hey ive seen that billboard before, ha, nice work.

were in ny? and size's, and how big of a hurry.