Jump to content

Mike Stormo

Puppy Poster
  • Content Count

    36
  • Joined

  • Last visited

Everything posted by Mike Stormo

  1. I just put a jake on my 673 no turbo engine last week. I took it from a B61 with a turbo 673 that I bought for parts. The jake extensions raised the valve covers about two inches. I haven't taken my B53 out for a test drive yet but I did drive the parts truck and I thought it held back very well. The parts truck also had a Williams exhaust brake but I did not try it on the way home.
  2. I used contact cement and left out the staples. Worked out great
  3. I have 4 1/2 inch intake air extension made of 304 stainless steel.They are 24" long with a bell on one end to slide over 4 1/2". I could not find one so I had a few made, I will sell a raw ( unpolished ) one for $275 including shipping ( usa only ) or a polished one for $400 including shipping. I can get other sizes made for other models and makes.
  4. Do you have an air cleaner intake top?
  5. I am in need of an air cleaner top that is 12" in dia. and 4 1/2" opening also a chrome pipe about 24" long and 4 1/2 dia that is swelled on one end to go over 4 1/2"
  6. I have a good B61 cab with no rust out I am going to take apart for parts .
  7. I am in need of an air cleaner top that is 12" in dia. and 4 1/2" opening also a chrome pipe about 24" long and 4 1/2 dia that is swelled on one end to go over 4 1/2" Remove Remove
  8. I am hoping that someone has already done this so I don't have to start from scratch. I would like to change my original air filter can (oil bath) over to a paper element. Is there a kit? Or do I just yard out the guts and fab up can for the element? I have a 1965 B53.
  9. I am looking for a headliner kit, who is Lancasters? Do you have contact info?
×
×
  • Create New...