rick harper

55k---crd95/96 I do believe.

Make sure you have the right part number dipstick. That doesnt explain the thin oil.

Any good upholstrey shop should be able to fabricate a boot.

Sold

"BOC" looks like a drom box.

Ben died yesterday I heard thru Mack Corporate

Part numbers for the springs, 38000 reg 4QK4001A, anti sway 4QK4003A and 44000 anti sway is 4QK4005A. I remember the Mack numberS. The new world numbers are not in my memory bank. If you use 4003A use 7QK3148P3 ubolt or 7QK3148P5 if you use 4005A spring. New washers are 35AX1435 and the nuts are 21AX131 for both ubolt part numbers. To tell the difference the 34/38 regular will be tapered at the ends. The anti sway will have a vertical cut at the end of springs. The end caps for 38K is 52QK418P4 and the 44K is 52QK418P5. Any good dealer should have all in stock.

No Cat trucks have sold in the Tulsa that I know of. Have never seen any up/down the road. Ill keep your post handy if I come on a deal with the kitty.

I have had this as long as I can remember. Fabric has no ripes or tears. Clean it and mount. 50.00 plus the bus ride.

Switch and brkts. Will throw away if no one wants it. 50.00 plus the bus ride. Worked when i removed and it has been stored inside.

SOLD. I might have left some money on the table. LoL!!!!!

NTC-400 Cummins, Fuller RTO12513 Tranny, FAW5371, 12000 Front axle, SS38 camelback with 4.17 ratio.

Truck is rough inside. Will have to be trailered to final destination. 1,000.00 USD. Scale of 1-10, 10 being great. I would rate this around 2 or 3.

Im in Tulsa, Okla.

2 out of 10 on scale.

Come by the shop and I'll donate a set of windshields for the Mack.

I have two(2) B61 emblems and two(2) diesel emblems. They are professional restored and are in perfect condition. If you would like these contact me thru an email.

You can send it to the Mack Reman facility and they could rebuilt it. I have done this several times. It has to be called/shipped from your local Mack dealer. Check part number 316GC184NX that might work. Does not come with the pulley but just pull it off.

I also have a set. Aluminum. Anyone want them please let me know.

These parts need a new home. Ill consider any offer that is close.

The main difference is in the axle ratings. RD690S the biggest rear bogie was 44 thousand. SX 52000 up to 80000 bogies.

7.93 x 4.17 x .78= 25.79

2100 / 25.79= 81.426 mph

Ill bet your 1st od is .87 and final od is

.78.

Shock mounts were never on 44.

Sounds like he didnt spline it correctly and advanced the timing way too much.

Rollers 55MX26 are available but not cheap.

12/21 axles. Thats 33k