rick harper

The new LR cab will make it debut at the 2015 Waste Expo this year.

Just read your from Canada. I know the credit is for USA dealers maybe for Canada too.

You can go to the factory and pick it up yourself. The factory will credit the dealer 500.00 for customer pickup. Request the 500.00 to be allocated to you so it will offset some cost.

I agree with Glen. Have pump calibrated.

run it.

They are expensive. Mack does have stock. Ill sell you an 85115412 for 940.00 bus the freight. If you want it call me at 918.697.8473.

The hand control valve is suppose to be spring loaded and not used for parking. If it is tractor/trailer it is used to apply air to trailer brakes. If you have a straight truck it operates the service brakes on the drive axles. I had a customer pull his valve down and went inside our shop. When the drive came out the tractor/trailer was down below the hill, crashed into the fence and stopped in the lumber yard. The driver was quite embarrassed.

you don't have to change shift knobs. Just nibble off the lock tab that locks it in so you can split the low side too.

Silly to pay that kind of money. No different than any other 2004 RD model. At the end of the day its still 11 years old. I can take an RD and make it look like a legend series for a lot less money.

37QC213A is the part number. Factory has stock. Any Mack dealer can sell you it.

Its to old for the factory to make one. If my memory serves me Mack will only go back 10 years.

so many deviations in a 88 R690ST that the book you find wont help you.

I put a Delco 39mt on mine

ppg 08282

If it shells,good luck with parts and pricing.

Mack has gone to 10w30 factory fill on all new trucks. We still use 15w40 but thinking of changing due to possible fuel gains. New oils will be out for the EPA17 engines. Its becoming a headache keeping track of all these changes.

Does the tractor have Bridgestone M726 Tires?? We have had some here that did the same thing and Mack replaced tires.

SOLD

2013 Mack CHU613, 505HP, 18sp.Mack Transmission, 14.6/44 axles on 46,000 Air Ride, Steerable 3rd axle. Mileage (1)60,000 the 2nd at 95,000. $115,000.00 each.

Contact Kenny Smith @ 1.918.606.1959

Rick Harper @ 1.918.697.8473

Recent repairs. Reman engine 4.20.08, 1,111,000

rod/main bearings and oil pump 3.14.13 1,728,000.

king pins- 4.4.13, 1,736,000

clutch, rear main seal and turned flywheel-4.1.14, 1,823,000

APPROX 35 TO 45 HOURS WORTH OF WORK THERE. TIMES YOUR LABOR RATE.

505C+, Mdrive, 12/40 Mack axles 3.56 ratio, Twin Y air ride, 70" midrise sleeper. Rawhide edition.

Forgot to state the miles. 1.9 million.

2001 Mack CX613. I sold this new in 2000. 1 owner and he drove it. 460,13sp, 12/40 air ride. 10 aluminum wheels. 80" high rise sleeper, one bunk. Rubber is in good condition. FOB Tulsa, Oklahoma. $13,000.00