Truck Shop

Center point spindles use a totally vertical King Pin and the bearing spacing is different compared to a conventional axle/spindle. 

 Might be a little lighter around 100 lbs each, these are aluminum hubs with steel drums. 1980 vintage.

23 hours ago, storkmack said:

Things can be shipped!!!

With drums and hubs roughly 275 lbs.

  Yeah, Know where there are two sets of them, one axle was mine. Only problem is your 2000 miles away.

Well I can see this will go on and on forever.

https://www.usatoday.com/story/news/factcheck/2021/01/14/fact-check-dominion-voting-machines-create-ballots-only-audits-tests/3973030001/

 That's pretty baseless-It doesn't have anything to do with how many showed up for a rally.

 I had a boss some years back that was selling a truck, about ten minutes before the would be buyer

showed up the boss came back to the shop. He told me to tell the interested party that the trucks runs out

real good. I looked straight at him and said straight out-{I have never looked at that truck, run it or 

drove it. Boss said again {just tell him it runs out real good ok} I looked the boss right in the eye and

replied { Your asking me to lie for you--Then you better let me know when it's ok to lie to you}

Lies are lies period.        

            If it has a lot of hours on it and the front structure gear train hasn't been checked it needs to be checked. The bull gear and related

            gear bushings can drop the oil pressure when hot at idle considerably. To check the aim on 3406 piston coolers Cat does that on

           a fuel injection test bench. Saw one in late 90's that the bull gear bushing gave out and bull gear sawed a half moon cut through

the front cover before disaster struck a short time later. 

  If the election was really rigged as some are saying and Biden is also some kind of sleepy idiot to boot.

  Just how did this mass election fraud take place if Biden is such a idiot? How could a idiot be able to

  control that many election boards across the U.S. and rig the election? If that were the case as some

  believe then Joe Biden is just possibly the smartest idiot on the planet. But none of that happened.

 Didn't happen folks. Not one reliable person has come up with verifiable proof-not one. 

This doesn't fit everyone from that age but it does fit a high percentage of them.

 Most of depended on how big and which city you lived in. But the real problem is acreage to the amount of people in the united states. 

Population in 1968-205,000,000

Population in 2020-331,000,000 

 It's called meeting in the middle, Both side have to give, it can't be one direction. I will help anyone who

needs real help I won't help or go along with phony ideas or laziness. Every morning I get up and make 

concessions all day in order to achieve what I started out to do. I think everyone likes their freedoms,

just some don't show it or think about it. 

 The FBI is arresting those people, local law enforcement is responsible for last year. 

 What part is it you want back? Because if it's all of it-most of it you wouldn't want back

  if you grew up in the late 50's through the 60's. It wasn't leave it to beaver. 

 Now as I stated before some time back {I voted Republican for years I'm a Independent for

the last 8 years}--- So

You don't have to campaign very hard when your opponent is your best salesman.  

Democrat's won't hold all three branches this time. Here's the facts.

 https://www.azcentral.com/story/news/politics/fact-check/2016/12/01/fact-check-one-party-three-branches-federal-government/94636286/

1 hour ago, storkmack said:

Now that we have one party rule, prove us wrong.

Republican's controlled the congress and senate in 2016 and they lost it if their own accord.

Before that the dems had control, It's this constant us or them-question can anyone pick out 

the party another person is affiliated with by how they look or dress, really does any of it matter?

A person should have learned by the age of 8 they don't always get what they want, concessions

are a part of life. 

No, by rule it will be the speaker of the house.

So it was all a conspiracy was it? Zero facts 60 court filings thrown out for lack of evidence. Fact is you couldn't find 60 judges to

agree on anything but with lack of evidence all 60 could agree on that fact. 

                  I narrowed this 379 Pete bowtie, had to reshape the ends slightly to fit cab sides and made a one piece center support

                  using 1/4" button head screws to hold it in place. Very strong/sturdy, the visor is 16 gauge stainless and heavy.

 That's a pretty straight KB you got there!

 Very Nice

On 12/18/2020 at 12:02 PM, Freightrain said:

Makes you wonder, as many of the big HD oilfield trucks still run 4 spd aux boxes, you think they would still offer parts for most of them?  Or have they narrowed down the boxes available and dropped off the older ones that no one orders anymore?

     For some years now the Spicer 1241 series twin counter shaft has been used because of the torque later engines develop.

     The 1241 has been replaced by the APO1000 model. 1241 pictured below.