mackdump600@yahoo.com

Thank you 

To Captain Crunch where was the airport show at .the haydentown fire truck served a mile from my house ,next to Smithfield PA and where are you located thank you

Just come across this post I know it's 3 years old but I have one just took it off what's your serial number on your truck mine is a 70 1045 serial number

Hi hoot where are you located at I'm in southwestern Pennsylvania I know where there's one at but the lady won't sell it for anyting I understood there was 45 of them built for the military with the 354 Hemi engines in it but I might be wrong won't be the first time though

Hi engine 1252 my name is Tom I am from South Western PA I have a 70 or 6:08 with a 707 C in it and my recommendations is do the electronics pertronix points also put a pyrometer on it my carburetor cleaned out and I didn't know it and it burnt the Pistons down the sides $7,000 to repair so keep an eye on the temperature enjoy

Hi Carney my name is Tom from southwestern Pennsylvania I have a 70  R 608 fire truck I'm converting into a pickup truck it got the 707 gas engine I understand they only made 63 70 fire trucks and 11 gas engines hope you enjoy running your truck around some parades or whatever I sure do

Hi all got my plates back from PennDOT today antique historical plates no inspections lifetime plate talk to Haggerty insurance they will ensure tractors pulling trailers doesn't have to be an antique trailer their requirements are is just to go to shows but they don't check mileage so hopefully that clears it up for all of us now just hope the shows keep going God bless us all thank you

1970 rear end out of a r608 fire truck 27 thousand miles on it approximately 58 miles an hour top speed comes with leaf springs spring hangers and 4 tires and rims 920 tires $2,500 or best offer or trade.  

79 U606T1236 single tractor roadworthy good shape sorry I don't have pics call 814-662-2703 Southside Salvage in Salisbury Pennsylvania close to Grantsville Maryland.  4000.00 

Hi I am in Southwestern PA next to Morgantown West Virginia and I rechecked with the same notary and it was probably my fault for wanting to title with two different ways antique and Custom and I think I got it cleared up he sent the paperwork in tonight see what happens maybe they'll give it to me thanks to all that answered appreciate it I'll keep you posted.  As far as the insurance the only thing he needed was a insurance company that was company that was insuring something of mine and that's all it needed it didn't have to be on that truck 

The notary service I went to brought it up on his computer and said he can't put an antique tag on anything over 10000 GVW it's something they just changed recently I guess I will go back to him and check again thank you for the answers and possible solutions

Hi I think that is the problem mine is body type ft fire truck and I want to change it to a custom and it won't let me do it without the enhanced inspection then after the enhanced inspection they say I can't do a antique plate thank you for your answer I suppose I will have to get my CDLs back and go to the way with the apportioned plate

Hi   hicrop 10 thank you for the response who did you go through to send your title in or did you do it yourself

That is an awesome tilt bed great job on it bet it's a blast to drive

That is an awesome tilt bed great job on it but it's a blast to drive

They are the local Center to send plates in she says I have to do a reconstructed title and I can't have anything over 10000 GVW on plates with antique and I plan on pulling a trailer and have to have a   aportion plate .can you send me the name and number of the guy you use maybe he can do it for me thank you

Hi I have a 70 or 6:08 fire truck that I'm trying to convert to a pickup and running into a snag on putting plates on it does anybody have antique plates over 10000 GVW in Pennsylvania they tell me I can't do it need some help

Hi Barry I still can't seem to find any shows listed on the calendar also my truck wasn't showed in the gallery from the last show it was the 49 Chevy feedmill truck must have missed the picture I guess thank you

Nice good job making  use of it that's the way to do it

Anybody going to drive down to Lexington I'm planning on taking a 49 Chevy 4400 series down

Hi Barry maybe you could check into getting the old style ball caps that's high in the front not the flat rounded ones like you've been selling maybe set them up with the your show date on them or something just a thought I believe they will be good sellers you seem to have a good turnout for it see you then thank you Tom

Hi just a thought when you guys post pictures of the truck shows could you put the owner the truck model engines most other pictures have them all listed thought it would be nice to be able to keep up with people in their trucks and where they're at you have a good show at new  Alexandria very good job thank you also where they are from. 

Hi Tom nine here was at new staton pa truck show 3years against and a fellow from Ohio had a 37 panel there don't recall his name but had a 57 million mile Mack bus there. Also 2crosleys maybe u can track him down with info. Good luck

craigslist Morgantown wv has a 37 mack tow truck EJ for 12000. in Thomas wv, listed under heavy equipment 

Hi, don't know who had it , but last summer at new Stanton mack show there was one there new Stanton pa that is