-
Posts
95 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by mackdump600@yahoo.com
-
-
Hi thanks all for the replies and yes you’re all right I should I give more information here’s the story I bought the truck in 04 . 21,000 miles on it took the fire bed off put a dump bed on it started hauling Sand and gravel ,at 24,000 miles the Pistons melted down through the side on one piston all the way through the rest of them was halfway burned through, sent them to a machine shop on the West Coast, they tig welded them up re-cut the rings ,supplied rings and racing shop that I had put it together took the cast strings and threw them away and put in chrome Molly, I run it from 24,000 miles to 27000 and they broke all the rings in it every cylinder , had it board out ,honed 20,000 over with no’s pistons,in a machine shop in Harrisburg PA , he had built these engines in the 60s did a great job on it brought it home ,started it up had less than one hour on it idling and running part throttle, and all six cylinders cracked the rings all three sets of rings ,I believe I had an out of time too much ,so it’s my fault ,I was just wondering what everybody else thought about it thank you very much for your replies and the help
-
Dang auto spell I know I corrected that before I posted it breaking rings 707 gas engine it broke the rings initially at 24,000 miles and again at 27,000 miles what could be breaking them
-
hi is there any old-school mechanics that work on the 707 engines particularly 707 say having problems breaking ranks I have a seven day or 608 was 27,000 miles and it’s broke the rings twice and it wondering what could be doing it any ideas thanks
-
Dang auto spell I meant Macungie thanks
- 2
-
-
Macungie PA show dang auto spell
- 1
-
Hi skippy Mack my name is Tom Nine from Smithfield PA I plan on going to my country this year hope you and your family can make it there really really enjoyed your post all the way through building your truck Hope to meet up with you there or somewhere in the coming years congratulations on a great job keep up the good work and keep us posted God bless and stay safe
- 1
- 1
-
Hi did you find a engine ? Call cal little at 717 566 8973 he has some takeouts
-
Looking for a set of 707c standard main and rod bearings call 724 557 2619 thanks
-
Hi are you still looking for U model located south of Somerset PA Salisbury mid-seventies u model single axle at Southside Salvage truck parts 814-662-4439
-
Hi to convoyduell what year and engine is your r608 fire pumper? I have a 70 AR 608 with the 707 gas engine just wondering what you do with yours thank you
-
-
-
Hi try this number 717 236 9387 Robert or cal little 717 566 8973 cal has some engines I'm sure
-
Hi I have a 70 r608 707 gas job never built much water in the tanks started running a little bit 3- 400 miles over a month starting get a lot of oil in the air tank is there a valve or something in the compressor head could be passing oil through could use some good advice thank you
-
Hi did you find anything ??
-
Looking for a complete set of shutters and valves for a 70 R 608 fire truck 707 gas engine thank you Merry Christmas to all and stay safe
-
-
To Captain Crunch where was the airport show at .the haydentown fire truck served a mile from my house ,next to Smithfield PA and where are you located thank you
-
Just come across this post I know it's 3 years old but I have one just took it off what's your serial number on your truck mine is a 70 1045 serial number
-
Hi hoot where are you located at I'm in southwestern Pennsylvania I know where there's one at but the lady won't sell it for anyting I understood there was 45 of them built for the military with the 354 Hemi engines in it but I might be wrong won't be the first time though
-
Hi engine 1252 my name is Tom I am from South Western PA I have a 70 or 6:08 with a 707 C in it and my recommendations is do the electronics pertronix points also put a pyrometer on it my carburetor cleaned out and I didn't know it and it burnt the Pistons down the sides $7,000 to repair so keep an eye on the temperature enjoy
- 1
-
Hi Carney my name is Tom from southwestern Pennsylvania I have a 70 R 608 fire truck I'm converting into a pickup truck it got the 707 gas engine I understand they only made 63 70 fire trucks and 11 gas engines hope you enjoy running your truck around some parades or whatever I sure do
-
Hi all got my plates back from PennDOT today antique historical plates no inspections lifetime plate talk to Haggerty insurance they will ensure tractors pulling trailers doesn't have to be an antique trailer their requirements are is just to go to shows but they don't check mileage so hopefully that clears it up for all of us now just hope the shows keep going God bless us all thank you
- 2
707 gas engine rings breaking
in Engine and Transmission
Posted
Sorry it won’t let me put any more reactions today