IH Farms 2

That's still better than the one synagrow driver that flopped a brand new full frame trailer 14 yrs ago because he wasn't paying attention too busy reading the newspaper 

PAI has them.  They are around 700 if I remember I bought one in December when I had to change the cam and lifters in mine.  It may be a pain to get off of the hub mine was 

There really is only 4 of us normally. If we are really busy will have Al Hint trucks hauling as long as no one needs there pool filled plus a few others here and there.

Yes cp is corn products or ingredion as it's called now. They have gotten better but if there is more than 60 trucks between loads there will be a line.

Ok I'll let him know about them

Wondering if these are buds or uni mount. If they are buds my father in law may be interested. It'd lighten up his truck a little and he needs it

That's good she cleaned up pretty good too.

Gee I won't recognize you now when they get that done for you. Not being in the old beat up spare truck you where in all last summer. I have a feeling from about April til September I'll be going to cp again thru elgin. Start Tuesday hauling out of fs in sycamore to cp

Where are you located? I just had one done for a superliner and it was 1495 without tax they did all the work. The place was Rex Radiator in East Dundee Il

Those cams if good are worth some money. Mack has a hard time finding good E6 cams nowadays

Can't get one thru mack anymore have to go thru PAI

Might want to try changing the plug end. Have had those go bad

My friend and his dad both have one. I think his dad probable has 50k on his does general farm pulling wagons and trailers no issues he drove it from northern illinois to key West pulling a camper shortly after he bought it had to finally refill the Def tank when he returned. My friend just Vaught his last year so far no issues

I took these pictures about two years ago of the Remmer/Shultz R-model. Was at the ethanol plant. Forgot I took these.

He's owned that one since it was new. It's a 91 350 9sp heavy single frame if I remember right

The one we did already had the crank out didn't think of that. Was in a farmall H

Update all the parts showed up today got the lifters and cam back in and started putting the timing gears back in. Should get a lot done tomorrow before family gathering

Have fun pulling those liners couldn't get mine out even with the proper tool had to take a torch and heat mine up in a line from bottom to top in three places even then the tool struggled to get them out. Installation was much easier I left them in their boxes and put them all in the freezer for a day they dropped right in like they original equipment.

I don't know if you have a mig welder but you can run a bead or two top to bottom instead of using a torch. Have done that on a dry sleeve block I'm sure I'd work on a wet sleeve 2

I would imagine it'll work the service manual is the same for both transmissions.

So there can't be that much different other than the gear ratios

Yep so it'll be a little bit before I'll have money to get that door from ya. Kinda wiped or cushion Out with this plus figured your not too worried since it's nice to keep the snow out of the cab when it actually decides to snow again

That's where I ordered the parts thru was fleetpride be here Wednesday so Christmas weekend will be busy

Bet that made quite a bit of noise while it was running.

Sure did was an exhaust valve for number 4 so was popping thru the intake and had noticeable miss. Had to have allen's towing come and retrieve it from cp 600 tow and 3100 in parts but that is a new balancer and motor mounts plus cam and 12 lifters

Pai industries sells cams and lifters for an e6 the hood did have to come off. Only could get half the cam out.

So had a lifter on #4 lose the bottom and ate the cam lobe off

Currently waiting on parts

You would think One day I plan on building one make it nice shop too

Couple macks on rt 23 between Marengo and Harvard far end one is a superdog

I think I've slowed down enough with work that I'll have a weekend to come look at the door and maybe some other stuff