Quickfarms

I need the part numbers for the blend door cable, dash or defroster vents and the cable that goes to the heater valve under the hood.

second issue is how do you change the blend door cable, it disappears under the dash

I need replacement cable the goes to the hot water valve and the blend door

I also need the AC switch 

how do you replace the blend door cable? 

1 hour ago, Geoff Weeks said:

What parts do you need? Most everything should be available from MEI-Airsource.

What is the key shaped hole in the passenger side for?

I am looking for the three missing vents, the plentum that goes from the blower to the evaporator.

is the grill densor available?

I have a 1986 RW632 and am looking for information and parts to get this air conditioner working again

Yes

1986 superliner  

the courtesy lamp switch does not affect the clearance lights unless they are turned on

what is the part number for the courtesy switch and the clearance light switch

On 1/7/2025 at 2:16 PM, tjc transport said:

what are the specs on it? 

BC400

13 speed 

I am looking for a drivers side door panel and arm rest, or a pair, in blue for a level 3 interior on a 1986 superliner 

Is that bar the bar that goes behind this grill in front of the hinges? 

Is this bar supposed to be in front of the two piece grill?

I have been busy with other projects and working, traveling, and going to shows 

this Mack also recieved three new air hoses, and two newer air cans 

yesterday I turned it around in the yard so it could park in the line

it will still take a lot of work before it is on the road but now it can move around the yard under its own power, which was the immediate goal 

This project has been on hold for a few months 

we had the wettest winter in Southern California I can remember in decades 

So today we spent the day working on the truck. After new fuel filters and repriming we pulled the air cleaner and we were ready to give it some starting fluid but as soon as it turned over it started and ran at a smooth idle with 35 lbs oil pressure 

so now I need to replace the air shutoff solenoid due to a large air leak. The fuel return hose is also leaking. The one leak that we can’t find the source is there is oil in the rear valley near where the slober tube is bolted on but we can’t see an obvious source 

I get the texts to verify a charge text back y or n

i have received several calls from the real fraud department. The caller asked me if the had the card in my possession and to call the number on the back. That is now my standard procedure.

be cautious and never give out your information to a caller unless you made the call 

On 1/6/2023 at 6:52 PM, 67RModel said:

Also, I think it technically illegal by National Electric Code to use a standby generator without a transfer switch. Automatic or manual. 

Even in California all you need to do is turn the main breaker off 

They make an interlock so that you have to turn the main breaker off to turn the generator breaker on.

I use a lockout device on the main breaker, so it is locked in the off position

at night I can tell when the power is back on by the street lights 

PM sent 

Great progress 

how much do you want for the parts?

can you ship them to 91722?

A second visor 

12 hours ago, JBushneck said:

I may have what you’re looking for. I will send some pics once I locate them

There appears to be a bottom piece to that visor, do you have that? 

I am looking for the following parts for my 1972 and 1970 R models 

the dash panel that contains the tach and speedometer, or a tracing of the panel 

the riser/ sunshade that goes between the above dash panel and the dash, I need two of these 

a speedometer 

a ashtray 

the cover that goes on the back of the cab between the floor and the air valves 

I ordered one today and they show 5 in stock 

Galleher in Pomona has all the pieces to build, repair or modify most flatbeds that you find her in Southern California 

https://galleherind.com/products/flatbeds-trailers/

Thanks I messaged both of them