-
Posts
147 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by MightyFruit Trucking
-
-
Looking for a 1998 CL-713 Hood, head lights as well
-
a Lot of Great parts
-
Its really an complete truck. The hoist works great. Like I said if someone is interested we can still take it out on the road or grab a load so you can see what shape she is really in.
-
-
etech! Make me a reasonal offer. Motor is strong, Transmission was completely reman from Mack dealer 2 years ago I have all paper work. new tranny mounts was put in at time and clutch. I had bought her from a guy that ran in and out of landfill. 85% of my work is asphalt this truck really did the job for me but all rolling on all that soft crap but a lot of stress on the frame. I also put a trunion on here as well it has no spider cracks.
-
I'm located in ohio. The frames has a crack and the hood needs replaced. But if someone wanted to test drive to test the motor or tranny its still drivable empty
-
I have a 1998 Cl 700 6axel Mack Dump Truck that I want to part out what is the best way to do it. Or what suggestions do you all have. E400 Motor over hauled with only 60,000 miles on her, 3 Tag axels, Mack 13 speed Transmission, Mack rear ends, Aluminum dump bed, just looking for suggetions
-
How much you asking for set buddy? any pics?
-
This Mack has the Gold Dog everything is Mack! Camel Back, mack Tranny, Engine, 6 bolt axel, 44 on the rear, The rear was reman in 2013 I think the previous owner did not seat it right and tighten it incorrect causing it to crack.
-
I have a 1998 Cl-713 Mack that had a cracked rear end Housing! Trying to see if anyone Knows where I might be able to find one in OHIO! And a round about Price on what I will have into purchaseing one! Many Thanks!
-
Ok Great i'll call them in the Morning!
-
Yes brought this new pup home it has 445 MP 8 with Allison transmission! My question is he won't run past 65 MPH. However here in Ohio speed limit is 70 MPH. What would I need to do to turn speed up?
-
My buddy is talking about getting one and he says Being that Volvo and Mack merged he is considering it but he doesn't know anyone that has one so I told him I'd try to find out!
-
I'm looking at purchasing a truck with a wheelbase 302 and bridge 330! Does any one know how much legally this truck can hall? It's a 6 axel dump truck.
-
Does anyone know any thing about 2006 VOLVO VHD64 Dump Truck the set up is VED12 Volvo 465 HP, 8LL, Jake, 4.56 Ratio, Hendrickson Walking Beam, Double Frame, 20K FA, 46K RA, 3 Steerable 13K L/A, Air Tailgate, 90 Gallon Aluminum Fuel Tank, 302" WB, 27'6" Bridge, 425/65R22.5 Steer Tires on Aluminum Wheels, 11R24.5 Drive Tires on Steel Wheels, Chrome Bumper, P/S, A/C, AM/FM CD, Heated Mirrors, Cruise, Diff Lock, Air Ride Cab, Power Passenger Window!
All I've ever owned was Macks. I'm trying to find out if Volvos are dependable piece of equipment.
-
But I used dump with an aluminum bed. And this thing is NASTY! It was ran in and out to land field hauling slag. I'm trying to get her ready to run asphalt. I got most of the thick stuff off but it's still a lot there! I'm open to any suggestion just need some direction. Sand blast, soda blast anything that you guys know that works! Many thanks!
-
Is that why the spec the Allison usually out at 445hp?
- 1
-
Thinking about buying a Used truck that was used in the Landfill to haul slag! As you guys know that stuff is Nasty! Wanted to know as far as cleaning the truck and going through her! Should I pressure wash, sand blast, should I change brakes, chambers, ??????? It is an Cl 700 1998 six axel and has Aluminum dump bed. Aluminum tag axel wheels! The Aluminum looks dirty and I would take any ideas on cleaning that up also! I'll be running her on milling and don't want to look like what she has been running in (DUMP)!
-
I took a look at the truck today and the rear hosing had a crack that they welded on the front of the housing near the front right! It looked like the weld held but he told me that he thinks another crack stared beside it! I really could get a good look because he's putting a new rebuilt Mack tranny in her! I'm really think I'm going to buy her a few months ago he had new reman Engine out in her, clutch, that rear end that has a leak was a remack read end put in a year ago. He put to knew tie rods on the front and new turbo when he put motor in! This guy had bought a few newer trucks and BANG HE LOST HIS MAJOR CONTRACT! So now he needs some quick money to keep things in order long story short he offered me this truck 98 Cl 700 six axel Dump for $20,000 I just don't see how I can go wrong!
-
They tell me the New Allison's 4500 series are bulletproof!
-
Thanks for the reply! I went to the dealership the other day and looked at the new Granites the way the had the antennas wired it looks like a lot of work to pull them wires and install your own!!! So I guess you right I'll just keep everything stock I just hope Mack used good stuff because communication is Key with me!
-
-
still need to know where to look for a used one! And also price on parts and Labor?
-
I think he either has 44 or 46 on the back and it's camelback suspension! I haven't looked at it yet I will tomorrow but he did tell me he tried to weld it before! So I just figured if I'm buying it expect the worst and find out what it would cost!
CL-713 Hood Wanted
in Trucks Wanted
Posted
I'd Like to thank you Dogg Rescue for putting this pup on the trail for a hood! Many thanks!