Kinard2 Posted March 18, 2006 Share Posted March 18, 2006 I am member of a small Volunteer Fire Department. We just added a 91 gh600 to our stable to pull our 5k water tank. In route to a fire, we lost our head lights. I was hoping someone could supply us with a wire dia. for the system. I have had much success with our IH trucks thru sites such as this. We are pleased to add this fine Mack to our family. Quote Link to comment Share on other sites More sharing options...
Barry Posted March 19, 2006 Share Posted March 19, 2006 Chances are that the toggle switch went bad. It is a 3 position 6 pole swicth. May be a 5 pin relay in the glove that you can check, also. I will see if I can get a wiring diagram, but I will need the complete vin or model and last 6 of the vin...Oh, and welcome to BMT!! Hope you enjoy the forums! Quote Barry - Watt's Truck Center Parts Manager and BMT Webmaster...1-888-304-MACK Link to comment Share on other sites More sharing options...
Terry T Posted March 22, 2006 Share Posted March 22, 2006 The '95 CH613 wrecker that I ran had about 15 or so extra lights on the bed and in a 2 1/2 year period we replaced the headlight rocker switch twice. Not sure if it is related to the extra lights drawing thru it or not, but it is a possibility.T. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.