Etu Posted 8 hours ago Share Posted 8 hours ago I have a 2005 CH600. Built in October 2004, built with an ASET AC-427 w/ T310 10spd. (Thank you Joey Mack). I don’t have any plans to sell or trade the truck, it will ride off into the sunset on our farm moving 56k-60k loads of farm products. Dedicated Farm Vehicle located in Georgia, not for hire. I’d like to fully delete the egr and cooler. Other than the delete kit , is there any else that must be done? (Manifolds, cam, etc)? thanks in advance. Eddy 1 Quote Link to comment https://www.bigmacktrucks.com/topic/76541-2005-ch600-egr/ Share on other sites More sharing options...
Joey Mack Posted 6 hours ago Share Posted 6 hours ago Is it only a farm truck, i assume no high speed road use? Quote Link to comment https://www.bigmacktrucks.com/topic/76541-2005-ch600-egr/#findComment-594018 Share on other sites More sharing options...
Etu Posted 4 hours ago Author Share Posted 4 hours ago Yes it can be used at highway speeds between fields and barns. Just not for hire. Quote Link to comment https://www.bigmacktrucks.com/topic/76541-2005-ch600-egr/#findComment-594024 Share on other sites More sharing options...
Joey Mack Posted 4 hours ago Share Posted 4 hours ago I have no idea how to delete an engine, and keep it running right. I do wonder if the 3 plug ECM was swapped with an E-tech ECM and swap the engine harness along with it,, since yours has a manual transmission.. 🤔 Quote Link to comment https://www.bigmacktrucks.com/topic/76541-2005-ch600-egr/#findComment-594025 Share on other sites More sharing options...
fjh Posted 4 hours ago Share Posted 4 hours ago You can cap off the egr valve make a plate to cover it and bolt it under the valve u need to cork off all the egr tubes ! And egr water coolant lines!The check engine light will stay lit but will not derate ! I did this to a customer truck shortly after he bought his truck new as an experiment! The truck ran for 150000 kms before we rebuilt the engine just because he wanted to! Not because it needed it! We also totally deleted a company truck egr cooler completely removed and it also worked fine for years like that! just saying! 1 Quote Link to comment https://www.bigmacktrucks.com/topic/76541-2005-ch600-egr/#findComment-594027 Share on other sites More sharing options...
Joey Mack Posted 4 hours ago Share Posted 4 hours ago Thanks for posting that fjh... i was lost... Quote Link to comment https://www.bigmacktrucks.com/topic/76541-2005-ch600-egr/#findComment-594028 Share on other sites More sharing options...
fjh Posted 4 hours ago Share Posted 4 hours ago Just to note that the customer truck only had the plate installed under the egr valve he never had any of the usual egr cooler failures because it never saw any heat expansion or contraction! Looked totally stock! 1 Quote Link to comment https://www.bigmacktrucks.com/topic/76541-2005-ch600-egr/#findComment-594029 Share on other sites More sharing options...
fjh Posted 3 hours ago Share Posted 3 hours ago 6 minutes ago, Joey Mack said: Thanks for posting that fjh... i was lost... 😅All good bro ! Just my 5 cents worth! Quote Link to comment https://www.bigmacktrucks.com/topic/76541-2005-ch600-egr/#findComment-594030 Share on other sites More sharing options...
Etu Posted 3 hours ago Author Share Posted 3 hours ago 9 minutes ago, fjh said: You can cap off the egr valve make a plate to cover it and bolt it under the valve u need to cork off all the egr tubes ! And egr water coolant lines!The check engine light will stay lit but will not derate ! I did this to a customer truck shortly after he bought his truck new as an experiment! The truck ran for 150000 kms before we rebuilt the engine just because he wanted to! Not because it needed it! We also totally deleted a company truck egr cooler completely removed and it also worked fine for years like that! just saying! After doing that, couldn’t you reprogram the Ecm with ECM Tune Up to remove any check engine lights or codes? Quote Link to comment https://www.bigmacktrucks.com/topic/76541-2005-ch600-egr/#findComment-594031 Share on other sites More sharing options...
fjh Posted 3 hours ago Share Posted 3 hours ago If you can find someone I guess ! Wouldn’t waste time and money on it myself! It’s a farm truck you’re likley not going anywhere your going to be checked for emissions! Quote Link to comment https://www.bigmacktrucks.com/topic/76541-2005-ch600-egr/#findComment-594034 Share on other sites More sharing options...
Etu Posted 3 hours ago Author Share Posted 3 hours ago This is who I had in mind https://truckecmtunes.com/index.html Quote Link to comment https://www.bigmacktrucks.com/topic/76541-2005-ch600-egr/#findComment-594036 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.