Jump to content

Looking 4 Drop Visor For Ch With 80" Millenium Sleeper


Recommended Posts

Looking for a drop visor to fit a Mack CH with a millenium sleeper. I've looked everywhere but just thought i'd check if anyone happened to know of one out there before I go through the work of fabricating one. Any help is appreciated. Thanks AJ Manders

JP Chrome would be the place to check. They advertise here on the site. Iknow they have a drop visor for flat tops & daycabs, they are good to deal with and should be able to help in your quest.

Link to comment
Share on other sites

JP Chrome would be the place to check. They advertise here on the site. Iknow they have a drop visor for flat tops & daycabs, they are good to deal with and should be able to help in your quest.

Hello Underdog,

JP buys some of their visors from Dieter's but did not show the trim strip so I put in the link.

Here is a link for you on your CX http://www.metchro.com/Flash/indexang.html

gallery_133_137_10125.jpg

Thanks for hearing me out.

You can have the soap box now---------JIM

Link to comment
Share on other sites

Hello Underdog,

JP buys some of their visors from Dieter's but did not show the trim strip so I put in the link.

Here is a link for you on your CX http://www.metchro.com/Flash/indexang.html

Thanks for the link. Some cool stuff on there. They must supply IOWA80 cause I see the grille and fender trim I got from them. You're right about the visors too. Mine came from Dieter's. Now that I see a picture of the Millenium sleeper I must agree only a trim panel is available for those. I was thinking of the old style high roof.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...