King7339 Posted January 22, 2022 Share Posted January 22, 2022 I have a 2004 mack vision. My fuel gauge is out. Lost all power going up a hill. Put fuel in the truck i think i primed it from a spot on the passenger side but it still won't start.also found a kinked fuel line on driver side. Any help would be appreciated Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted January 22, 2022 Share Posted January 22, 2022 (edited) loosen 2-3 fuel lines at the head, and pump the hand primer until fuel comes out, wait for the air bubbles to stop. tighten the first line that bleeds, then pump again til another one bleeds, tighten it then go on to the next. (17mm or 19mm wrench) then fire it up !! jojo Edited January 22, 2022 by Joey Mack More content needed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.