Mack granite cv713 no power

[Mackdriver99]

I have a 05 granite with the cv713 and trying to pull some power out of it. I have all sorts of codes on it but none active. Like to try and figure out some reasons behind all the codes and what's necessary to get power out of it. When its empty it's not horrible but loaded it feels like I could ride a bike faster than it lol. The slightest incline has it on its knees trying to go. Also on acceleration it has almost a miss kinda like a tisk tisk tisk and then it'll go. Sometimes under load it'll randomly just die to about half power and then come alive again so to speak.

Attached is the sheet of codes that were pulled

Edited April 9, 2020 by Mackdriver99

[Mack Technician]

On ‎4‎/‎9‎/‎2020 at 4:04 PM, Mackdriver99 said:

I have a 05 granite with the cv713 and trying to pull some power out of it. I have all sorts of codes on it but none active. Like to try and figure out some reasons behind all the codes and what's necessary to get power out of it. When its empty it's not horrible but loaded it feels like I could ride a bike faster than it lol. The slightest incline has it on its knees trying to go. Also on acceleration it has almost a miss kinda like a tisk tisk tisk and then it'll go. Sometimes under load it'll randomly just die to about half power and then come alive again so to speak.

Attached is the sheet of codes that were pulled

Pull up a chair 99', your not alone...….

Keep an eye on your 8 codes, like the 8-5. Usually those end up requiring an EUP replacement.