steeler Posted December 4, 2018 Share Posted December 4, 2018 After an injector cup job, while adjusting valves, the plunger on #5 exhaust valve is sticking out a little more than the others. All others adjusted fine, but#5 has a much thinner shim under it, like someone had this issue last time. If I push down on the rocker arm, three is a little spring loaded feel to it, not anymore than the others had. Any reason this plunger is sticking out further? Quote Link to comment Share on other sites More sharing options...
fjh Posted December 4, 2018 Share Posted December 4, 2018 Check the engine brake slaves for winding apart ! Valve resessesion? Quote Link to comment Share on other sites More sharing options...
steeler Posted December 4, 2018 Author Share Posted December 4, 2018 (edited) I just pulled the rocker back loose and switched 4 and 5 plungers. Everything looks perfect now. I don't know why that plunger doesn't like being in number 4, but it all adjusted up just fine now. Edited December 4, 2018 by steeler Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.