Paul prinzo Posted December 4, 2016 Share Posted December 4, 2016 i had an air leaking from a valve that threads into the top of the transmission right behind the shifter. It has an air line that appears to come from a regulator and a 1/4 steel tubing line that runs from the trans to the area of the injector pump where it is capped. What is this valve for? Quote Link to comment Share on other sites More sharing options...
39 Baby Mack Posted December 7, 2016 Share Posted December 7, 2016 Maxi miser was a trade name for a dual stage governor setup on the injection pump. Air would be diverted to the governor on injection pump in all gears except high gear. This would allow the engine to wind out in all gears except high gear. When the transmission was in high gear the air supply to the governor would be shut off and limit the RPMs to cut down the speed and increase the fuel economy. Ron Sent from my SM-G900V using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Paul prinzo Posted December 7, 2016 Author Share Posted December 7, 2016 Thank you Ron for the info Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.