Jump to content

Paccar Introduces Enhancements to (DAF) MX-13 and MX-11 Engines


Recommended Posts

Paccar Press Release  /  October 13, 2016

BELLEVUE, Wash. - Paccar is launching exciting new power, torque and fuel efficiency enhancements to its MX-13 and MX-11 engines for North America.  The new engines will be available in Kenworth trucks in January 2017. “The MX-13 and MX-11 engines are designed to deliver optimum performance, durability, fuel economy, and the lowest total cost of ownership for our customers.” said Landon Sproull, Paccar vice president.

Paccar increased the MX-13 engine’s output to 510 hp and 1,850 lb.-ft. of torque and increased the MX-11 engine’s output to 430 hp and 1,650 lb.-ft. of torque. The enhanced MX-11 engine also adds a new 335 hp and 1,150 lb.-ft. torque rating in the lower end of the power range. The MX engines deliver peak torque at 900 RPM for the majority of engine ratings, supporting increased performance and driving flexibility.

Paccar (DAF) designs MX engines to an industry-leading B10 life of one million miles. This means 90% of the MX-13 and MX-11 engines are expected to reach one million miles without the need for a major overhaul. Each MX engine also comes standard with factory installed remote diagnostics to deliver proactive customer support. This translates into low cost of ownership and superior uptime for truck owners.

The 2017 MX-13 and MX-11 engines include a new single cylinder air compressor, variable displacement oil pump, and variable speed coolant pump providing customers with fuel economy gains over the previous engine design. The latest MX-13 and MX-11 engines extend oil and fuel filter change intervals from 60,000 miles to 75,000 miles, a significant cost savings for customers over the life of the vehicle. The MX-13 and MX-11 engines now utilize a single canister aftertreatment system that reduces weight by 100 lbs., improves serviceability and lengthens service intervals.

Paccar (DAF) is one of the leading diesel engine manufacturers in the world with the design, manufacture and production of 1.4 million engines globally since 1957. “Paccar will have 135,000 MX engines in operation in North America by year end. Nearly 50 percent of Kenworth trucks delivered to customers in North America this year will be powered by a MX engine,” said Sproull. “This strong adoption level is a testament to the outstanding performance, durability, fuel economy and low cost of service delivered by the MX-13 and MX-11 engines.”


image 1.JPG

image 2.jpg

Link to comment
Share on other sites

Driving the new Paccar rear axle, 2017 MX engines

Truck News  /  October 14, 2016

Integration has been the name of the game as truck manufacturers have striven to bring unprecedented fuel economy to their vehicles, and Paccar has upped its efforts with the introduction of its first North American axle.

“With the greenhouse gas push for better fuel economy, I think the rear axle is a key component in having better performing fuel economy,” Anthony Gansle, Peterbilt’s marketing manager for on-highway vehicles told me before letting me drive one of the first trucks equipped with the new tandem axle.

It was a Peterbilt 579 EPIQ package with a 40,000-lb rated Paccar rear tandem axle, powered by the new 2017 Paccar MX-13 engine, which itself received several updates. I also drove, soon after, a Kenworth T680 with that same Paccar axle and updated 2017 MX-13 engine.

It’s not easy to evaluate an axle. Any advantages delivered by a proprietary axle are likely to show up on the fuel economy reports and won’t be noticed from behind the wheel. And this is where Paccar is confident some tangible savings will be seen.

“Two of the three major components are now in place,” said Kevin Baney, Kenworth’s chief engineer. “This is really about building a Paccar powertrain going forward, largely around our Paccar engines.”

The obvious omission is the transmission, but Baney said he’s pleased with the level of integration Kenworth has achieved by working closely with Eaton. Both trucks I drove had a Fuller Advantage automated 10-speed. Paccar has worked closely with Eaton to ensure the transmission is optimized to work with its engine.

The fuel savings provided by Paccar axle – figures have not yet been disclosed – will come from reduced weight and internal friction. Gansle said the new axle is 80-140 lbs lighter than competitive offerings.

“This is going to be more efficient than anything out there,” vowed Baney.

Weight was taken out by laser-welding internal components. Less oil is required as well. And Baney said there’s less friction within the axle. A pinion throughshaft design simplifies power flow in the axle for improved efficiency, Paccar claims. Ratios from 2.47 to 3.70 are offered with engine torque compatibility of up to 1,650 lb.-ft. and a multi-torque rating of up to 1,750 lb.-ft. It was designed for linehaul applications. The gross vehicle weight limit is 80,000 lbs.

Enhancements to the Paccar engine we more appreciable from behind the wheel, in the form of added torque and power. The MX-11, which I drove in a Kenworth T680 Advantage day cab, features an extra 100 lb.-ft. of torque. The MX-11 I drove was rated at 430 hp/1,650 lb.-ft. and was able to pull some pretty significant grades near Kirkland, Wash. without trouble. It was surprisingly sprightly for an 11-litre and may open the engine up to some new applications.

“We think of the MX-11 in terms of vocational applications, but with the additional torque it’s going to be a nice linehaul engine for us when you think of the significant weight reduction it provides,” said Gansle. Peterbilt, of course, also offers the MX-11, though I didn’t drive one in a Pete.

Kenworth’s Baney said the MX-11 and MX-13 now collectively cover about 85% of customer applications.

The MX-13 was given an extra 10 hp, bringing its top rating to 510 hp. In addition to bringing some improved performance to its MX engines, Paccar also made changes to the design that will improve fuel efficiency by 3%, the company claims. These include a new variable geometry turbo on the lower horsepower-rated MX-13s, a variable displacement oil pump and a variable speed coolant pump. It’s all about limiting the power consumed by these components to what’s actually required.

“It will help prevent a lot of engine efficiency losses,” Gansle said. “We will see fuel economy benefits and the customers will see cost of ownership benefits. Our oil intervals will improve and some other intervals for maintenance are going to improve.”

Oil change intervals are being extended from 65,000 miles to 75,000.

Baney said Paccar addressed three areas to improve the fuel economy of its engines: air management, the combustion cycle and making components variable speed.

Also new is a single-canister aftertreament system designed by Cummins.

“We have integrated the DPF, SCR and DEF pipe into a single can,” Baney explained. “It really helps with packaging and also in managing weight reduction.”

The new aftertreatment system shaves about 100 lbs off the weight of the vehicle. Paccar has seen a solid uptake of its proprietary engines since bringing them to the North American market in 2010 and by the end of this year, will have 135,000 on the road here. Nearly half of all Kenworth and Peterbilt trucks sold this year were powered by Paccar engines.

The company is hopeful its first rear axle will be received just as enthusiastically. It’ll be the standard offering in the databook. The new axle will enter production in January.

Paccar officially introduced the new axle and enhancements to its MX engines at the American Trucking Associations Management Conference & Exhibition earlier this month. You can read that report here.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...