So here is the deal. I'm helping a friend with an older mack with the E Tech in it. He just did a motor swap and had the ECM reflashed for the reman motor. The problem is it is still running poorly and throwing a code saying mid:128 sid: 231 fmi: 8 blink code 6-8. We did a cylinder cutout test and got no change in how the motor runs with cylinder number 5 cut out. That tells me number 5 is dead. We checked the eup, injector, cam, lifter, timing, ran the rack on it twice, and pressure tested the cylinder. I know the code is for the data link on the J-1939 but would that have anything to do with number 5 being dead? Any insight or help would be awesome.
Question
RDOTC
So here is the deal. I'm helping a friend with an older mack with the E Tech in it. He just did a motor swap and had the ECM reflashed for the reman motor. The problem is it is still running poorly and throwing a code saying mid:128 sid: 231 fmi: 8 blink code 6-8. We did a cylinder cutout test and got no change in how the motor runs with cylinder number 5 cut out. That tells me number 5 is dead. We checked the eup, injector, cam, lifter, timing, ran the rack on it twice, and pressure tested the cylinder. I know the code is for the data link on the J-1939 but would that have anything to do with number 5 being dead? Any insight or help would be awesome.
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.