Kansas farmer Posted May 20, 2016 Share Posted May 20, 2016 Wondering if anybody has a cutter to make the holes for switches in the dash of a 91 ch? my local dealer has one but it's broke. I can do it with a little saw but I have to make quite a few holes. If somebody has one they could mail me that I could use and mail back that would be great. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
AZB755V8 Posted May 21, 2016 Share Posted May 21, 2016 (edited) Dremel tool with the thin cut-off wheel works good for the rectangle switches and a stepped drill for the round, touch up with a Dremel with carbide burr. Once you got it you will use it for more stuff. Cheap at Home Depot or Lowes. Battery one is cool but the battery is dead most time I go to use it and have to plug it in anyway, Get the 120 volt one. Edited May 21, 2016 by AZB755V8 Quote Link to comment Share on other sites More sharing options...
Kansas farmer Posted May 22, 2016 Author Share Posted May 22, 2016 Thanks I'll give that a try. Last time I used a utility knife and that didn't work the best. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.