Cumminspr513 Posted July 4, 2015 Share Posted July 4, 2015 I feel like an idiot for asking but what am I missing that I can't remove my oil bath cartridge from the housing? Truck is a '57 B with 673. The bottom of the housing is off and the wing-nut has been removed and the small filter on the bottom is out but nothing else will budge........little help please. Quote Link to comment Share on other sites More sharing options...
BOB DINGSDALE Posted July 4, 2015 Share Posted July 4, 2015 thats as much that comes apart with out drilling the spot welds 1 Quote Link to comment Share on other sites More sharing options...
Maddog13407 Posted July 4, 2015 Share Posted July 4, 2015 yup, doesn't come apart..... I have thought of putting a dry type in one of those myself. I have a few canisters that someone gutter already. Quote Link to comment Share on other sites More sharing options...
Cumminspr513 Posted July 4, 2015 Author Share Posted July 4, 2015 So the larger metal canister with the screen in it stays inside the housing?If so what is the best method for getting all the "mung" out that I can see on the inside wall of the housing between it and the canister? Quote Link to comment Share on other sites More sharing options...
BOB DINGSDALE Posted July 4, 2015 Share Posted July 4, 2015 if your close to a steam cleaner or large tub of solvent or try that "30 SECOND" cleaner. It works like a hot dam. Quote Link to comment Share on other sites More sharing options...
Maddog13407 Posted July 5, 2015 Share Posted July 5, 2015 yup, the hard way. take it off and soak it or use something to scrape the grease out. its a bad design. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.