thomastractorsvc Posted June 30, 2015 Share Posted June 30, 2015 Anyone have the frame to frame measurements for a Superliner sleeper and the distance from the back of the cab. I think I have it figured out but looking for confirmation. I mocked mine up today and I have 6 5/8 from the sleeper frame to the truck and 3 inches from the cab. Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
thomastractorsvc Posted July 2, 2015 Author Share Posted July 2, 2015 Crickets?!?!?!?! where is all the superliner guys? Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
Keffer inc Posted July 8, 2015 Share Posted July 8, 2015 Well, I'm a ch guy, so my opinion is likely bad, but I would measure the frame to bottom of my cab, and use the same measurement. And 3" for the boot seams ok if that's what the boot was intended for. Closer might not hurt though, 2 1/2? But I'm not at all an expert so good luck. Got any pics? Quote Link to comment Share on other sites More sharing options...
thomastractorsvc Posted July 8, 2015 Author Share Posted July 8, 2015 no every-time I am out working on it don't have the phone handy. I made all the uprights and have them mounted need to raise the sleeper back up and set it back on to check the cross pieces, I will take some then. Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
Keffer inc Posted July 8, 2015 Share Posted July 8, 2015 What if you put square tubing under the cab and sleeper? Like a newer truck, Bet that would ride smoother than just air bags on the back of the cab. Quote Link to comment Share on other sites More sharing options...
thomastractorsvc Posted July 8, 2015 Author Share Posted July 8, 2015 I changed everything back to solid mount as from the factory. The air ride homemade setup had the hood hitting the cowl and it was cracked from beating. The hoods are different for the air ride vs solid mount trucks so are the radiator mounts and cross pieces. When I bought the sleeper I bought the hood which was perfect and it too is set up for a solid mount cab. I looked at trying to change it over but there is a lot of differences in the hood and how it rides on the cowl I could not find all the pieces and some of the ones I found were expensive. Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.