davethewave Posted February 17, 2015 Share Posted February 17, 2015 Does anyone know where the timing marks are located for a 96 engine e7 427? I can't seem to find them and they are not on the harmonic balancer Quote Link to comment Share on other sites More sharing options...
staxx Posted February 17, 2015 Share Posted February 17, 2015 On the flywheel .. Quote Link to comment Share on other sites More sharing options...
davethewave Posted February 17, 2015 Author Share Posted February 17, 2015 so what kind of mark am I looking for on the flywheel? Quote Link to comment Share on other sites More sharing options...
staxx Posted February 17, 2015 Share Posted February 17, 2015 Remove 6 bolt plate on bottom of flywheel housing and in the middle is your pointer turn your engine over till you see the timing mark setting you are looking for . Quote Link to comment Share on other sites More sharing options...
wilbur Posted February 17, 2015 Share Posted February 17, 2015 Going to be hard to see, better wear some cheaters. Quote Link to comment Share on other sites More sharing options...
MACKTRUCKS4 Posted February 17, 2015 Share Posted February 17, 2015 The timing marks are in the side of the flywheel. You'll have 3 spots with marks, they will be 120 degrees apart, one will have the TDC with degrees both ways, the other 2 will have the cylinder numbers. Unless someone changed the flywheel with an aftermarket one and some of those don't have the timing marks on them. The numbers are small and fine print so look hard, Quote Live every day like it's your last, because one of these days, it will be. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.