staleysteel Posted March 13, 2014 Share Posted March 13, 2014 95 CH613 e7-350 V-MACI'm looking for a relay panel layout for this truck. There wasn't one behind the "glove box door" covering the panel. Local Mack dealer doesn't have one.Turn the truck off and kill the lights, and the truck lights go out, but the trailer lights stay on. Happens with more than one trailer, and said trailers only exhibit this behavior with that one truck. Unplug the pigtail and lights go out. Plug the pigtail back in, lights stay off until you turn the switch back on. Tried a different pigtail, same issue. Unplugged the light switch, trailer lights still on. Finally started pulling relays. Found one that made the lights go out when it was pulled. Tried a different relay, and lights stayed on until the relay was taken out.So...I'm trying to find out what that relay does. Lights work fine with the relay out, but I'm afraid it might control something else important. Knowing what all is on that circuit might give me a clue where to look for the ultimate gremlin.Any help would be greatly appreciated.Mike Quote Link to comment Share on other sites More sharing options...
Deere Mack Posted March 15, 2014 Share Posted March 15, 2014 Hello and welcome to the forum! I can't guarantee this to be correct, but it's what came with my 96 CH 613. Good luck!1996 CH613 fuse panel.pdf Quote Link to comment Share on other sites More sharing options...
Heckard Posted February 2, 2022 Share Posted February 2, 2022 Fuse for windshield wipers Quote Link to comment Share on other sites More sharing options...
Heckard Posted February 2, 2022 Share Posted February 2, 2022 Fuse for windshield wipers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.