dusty0791 Posted June 4, 2013 Share Posted June 4, 2013 When i let my foot off the gas to let the jake kick in I have a dead short somewhere I have ruled out it being the jake solonoids is there any other place where it could be rubbed through? And also when the jake is on my volt meter drops to about 13 volts from 14. Any help would be appreceated Quote Link to comment Share on other sites More sharing options...
felicello122 Posted June 4, 2013 Share Posted June 4, 2013 Check the harness on the motor, the clips holding the wires on the valve covers especially. You might have a weak relay also. Quote Link to comment Share on other sites More sharing options...
dusty0791 Posted June 4, 2013 Author Share Posted June 4, 2013 The clips going into the valve covers are good and I tried different relays and they all do the same thing. If I jump a wire from a hot 12 volt to the panel where the relay is it just sparks indicating a dead short right? But I wouldn't think the wire going to the jake on the valve covers is thick enough to cause this much power loss. Could I have a ground problem? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.