doccarbon Posted April 25, 2012 Share Posted April 25, 2012 Can anybody help describe the proper toe-in adjustment for a Mack Model AC, with hard-rubber tires?Thanks,doccarbon Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted April 25, 2012 Share Posted April 25, 2012 Well to check the same way as if you had a radial tire. Paint a waise line all the way around in ceanter and then spin while some one scribes a line all the way round the center of the tire. Then let dowm on ground and measure from center of one tire to other and compare the from measurement to trhe back of the tire. Quote glenn akers Link to comment Share on other sites More sharing options...
doccarbon Posted April 25, 2012 Author Share Posted April 25, 2012 Thanks - that's a good start for us.Do you know what the proper toe-in specification is? Some information we have indicates toe-in should be as much as one-inch.One inch seems like a lot, compared to standard toe-in's of 1/8 or 1/4 inch. But maybe that is what is required for solid rubber tires?Thanks for your help,doccarbon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.