Mort Posted April 22, 2012 Share Posted April 22, 2012 We have a R600 which has developed a problem when changing from high in one gear to low in the the next highest gear. We used to be able to flick the switch then change to the next gear and it would be in the low range immediately. Now the split is very slow and it is easier to leave it in high, change gears then flick it to low just before putting the power back on. Any suggestions most welcome. Quote Link to comment Share on other sites More sharing options...
ducky698 Posted April 22, 2012 Share Posted April 22, 2012 Hi, water in the line? road rangers were bad for this. make sure the air lines are nice and dry.Grant Quote Link to comment Share on other sites More sharing options...
Mort Posted April 22, 2012 Author Share Posted April 22, 2012 Thanks Grant.So is the issue that there is water in one of the solenoids and if so how do i go about fixing this. Do I just disconnect evrything and blow it out?Ian Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.