doe70 Posted August 31, 2011 Share Posted August 31, 2011 Gday, about to renew head gaskets on an endt673 c motor, what else would i need to order in to speed job up, any other gaskets/seals or can get by with whats there generally? and i guess is job pretty straight forward? any tips..cheers ellis Quote Link to comment Share on other sites More sharing options...
skip Posted August 31, 2011 Share Posted August 31, 2011 Why are you replacing the head gaskets mate? Quote Link to comment Share on other sites More sharing options...
doe70 Posted August 31, 2011 Author Share Posted August 31, 2011 have pressure building up in radiator, hoping its just the gasket not head at fault.cheers ellis Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted September 1, 2011 Share Posted September 1, 2011 Here is something to think about. That engine when built used a flat flange liner and most guys replaced them with the maxidyn liner that had a fire ring in it was well as a ring cut in the head. So i would think your going to have to pull heads first so you know what head gasket to order. Quote glenn akers Link to comment Share on other sites More sharing options...
doe70 Posted September 1, 2011 Author Share Posted September 1, 2011 yep thought of that, talked to the old mechanic who worked on it in the 80's - is orig gasket set up. thanks for the input though. a complete set of head and associated gaskets from mack is around $475 aust, they dont give em away do they.cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.