Jump to content

Cylinder Heads For Enf510A Motor


Recommended Posts

Looking for Cylinder heads for a 1947 Mack 75 fire chassis. Truck is used in Parades and his owned by the Tallmadge Ohio Historical Society. The Engine serial # is ENF510a-28-15. The truck runs, But we have a cracked front head in front near the water pump. Contact Mike Schafer@ mpschafermi@sbcglobal.net or phone 330-633-0339. Thanks!

Link to comment
Share on other sites

Looking for Cylinder heads for a 1947 Mack 75 fire chassis. Truck is used in Parades and his owned by the Tallmadge Ohio Historical Society. The Engine serial # is ENF510a-28-15. The truck runs, But we have a cracked front head in front near the water pump. Contact Mike Schafer@ mpschafermi@sbcglobal.net or phone 330-633-0339. Thanks!

That head can most likely be repaired but will be expensive. This is of course unrelated if you can't find a replacement. A 55% nickle filler works well on cylinder heads but the technique has to be correct with pre, and post heating to avoid stess cracking. Most competent machine shops can perform this function followed by an "old time" automotive machine shop for second operations. Of course if you can find a shop that works all inclusive, they could handle the job complete.

Rob

Dog.jpg.487f03da076af0150d2376dbd16843ed.jpgPlodding along with no job nor practical application for my existence, but still trying to fix what's broke.

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...