granitefan713 Posted December 7, 2006 Share Posted December 7, 2006 Has anyone ever hear of having a Mack 10M (10 forward 6 reverse gears) transmission in a Vision? My dealer has a used 04 Vision spec'd this way and I was wondering if it is common. Quote http://www.flickr.com/photos/granitefan713/-Dave Link to comment Share on other sites More sharing options...
rick harper Posted December 7, 2006 Share Posted December 7, 2006 It is a great transmission. The only problem is you don't have a designated reverse hole. It is operated with a splitter button on the stick. If you are parked close to something you just have to remember what position that button is in or you might run over or back over something. Is the 10M common in a Vision? not really, but what is common in the trucking industry? Quote Link to comment Share on other sites More sharing options...
maxidyne237 Posted December 7, 2006 Share Posted December 7, 2006 that 310 m is a nice trans mack built. i bet its going to be one of their best ever. you also know its in reverse by the big "R" lit up on the dash board and by the position of the reverse/forward rocker switch good set up in my opinion especially with six in rev. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.