Jump to content

2004 Ai 427 Motor


jweilert
 Share

Recommended Posts

new to us 2004 mack vision with the 427 engine, issue is when you let off the throttle seems that the jake brake always come on a little, then when you get back into the throttle, it makes two belching kind of noises and then take back off, almost like it is missing out. Also does not have the power of or 98 427. Any help would be appricated

Link to comment
Share on other sites

new to us 2004 mack vision with the 427 engine, issue is when you let off the throttle seems that the jake brake always come on a little, then when you get back into the throttle, it makes two belching kind of noises and then take back off, almost like it is missing out. Also does not have the power of or 98 427. Any help would be appricated

If the engine has the "powerleash" engine brake, the o-rings on the engine brake solinoids could be bad/cut and causing oil leaking into piston area and slightly applying brake. We have seen this before quite often. As far as the low power, read some of the posts on the 460 HP CV's and about going to the dealer to get both ECU's reflashed with the new software for poor throttle responce. Need last 6 of the vin and I can tell you if it need the new software.

Link to comment
Share on other sites

new to us 2004 mack vision with the 427 engine, issue is when you let off the throttle seems that the jake brake always come on a little, then when you get back into the throttle, it makes two belching kind of noises and then take back off, almost like it is missing out. Also does not have the power of or 98 427. Any help would be appricated

Also does it have a auto shift or ultrashift trans? If so the engine brake will engage to help the trans shift even if you got the brake turned off.

Link to comment
Share on other sites

Also does it have a auto shift or ultrashift trans? If so the engine brake will engage to help the trans shift even if you got the brake turned off.

no has a 10 speed, any ideal about what would cause the beleaching and missing when you get back in the throtle

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...