girecycling Posted November 6, 2009 Share Posted November 6, 2009 I have a 2004 Mack Front load garbage truck with an Aset engine (350 HP). Can I replace that engine by simply bolting a 350 E7 in it? Quote Link to comment Share on other sites More sharing options...
ThaddeusW Posted November 6, 2009 Share Posted November 6, 2009 I have a 2004 Mack Front load garbage truck with an Aset engine (350 HP). Can I replace that engine by simply bolting a 350 E7 in it?Hi, and welcome aboard!Is the ASET blown or just giving you too much trouble? Quote -Thad What America needs is less bull and more Bulldog! Link to comment Share on other sites More sharing options...
girecycling Posted November 6, 2009 Author Share Posted November 6, 2009 Hi, and welcome aboard!Is the ASET blown or just giving you too much trouble?Thanks! The engine is blown. Quote Link to comment Share on other sites More sharing options...
Mackpro Posted November 7, 2009 Share Posted November 7, 2009 I have a 2004 Mack Front load garbage truck with an Aset engine (350 HP). Can I replace that engine by simply bolting a 350 E7 in it?You could install a 1999 and up Etech engine with a few mods. The EUP pumps are different between the Etech and ASETs so to get the correct HP you need the orignal Etech ECM. The ASET fan is bolted to a fandrive not the water pump as on a ETECH. We have put 99 ETECHs in many newer 06 and 07 CV713's. We are a dealer and can program the ECM,s to match and run quiet good. I would not use a mechanical E7 or a electronic E7 VMAC1 or 2 because most all you guages would not work and it would require alot of rigging. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.