Jump to content

Wiley Farm

BMT Benefactor
  • Posts

    64
  • Joined

  • Last visited

Everything posted by Wiley Farm

  1. I want to hook up a CB radio in my 1960 B61. It is still 24v start, 12v run. It still is + ground. Is there any way to hook up this radio without changing over to - ground? Thanks for any help.
  2. Thanks Big Dog. That gives me a place to start. I may have to do the same.
  3. I need some help with my 1960 B613T. I want to replace both tie rod ends. Truck has FA517 axel with straight tie rod tube and male threads which are both righthand. The tie rod ends are female threaded. The left hand tie rod end came apart (lucy I was only going about 15-20 mph) and on the end of the pin is a number 5070 D. There are numbers on the tie rod end housing but I can't make them out. The tie rod ends have a 2 bolt lock down. Any help would be appreciated guys. Thanks, Dale..
  4. I have a question about rear turn signals on my B61 Mack. According to my wiring digram the rear of a road tractor was not equipted with turn signals. Is this a fact? Also does DOT require an owner of a B61 to put rear turn signals on these trucks to be legal to operate on highways? Thanks in advance guys.
  5. Thanks Mark. Didn't think about the "dead- blow"!

  6. Thanks Randyp, I didn't have any good pictures of the collection in my shop. Will take some and post so long as my wife don't see the picture of us on here!!

  7. From the album: Wiley Farm

    This is my Ford model TT (ton truck) built in 1919 and yes take my word for it, the front hand crank WILL break your arm!!
  8. From the album: Wiley Farm

    Myself and my grandson in a sunflower field on the JD720
  9. From the album: Wiley Farm

    This is myself and my grandson in a parade for childrens healthcare in down town Atlanta! Only way anyone can get me to Atlanta!!
  10. Thanks, Superdog. I was just wondering about the engine which has serial# T676 7A4314 on top of the timing cover.
  11. Can someone tell me where I can verify engine type and truck year model with the serial numbers I have? Thanks..
  12. Howdy Randyp, I do plan to post some pictures as soon as I can get my wife to help. I have never been able to find the right size socket wrench to work on this computer!

×
×
  • Create New...