KKERGALL

43MR213P1 ????

What did P/N# end up being?

K

Pretty sure it should be a E3 / 20QE369 if I remember correctly and I think 20QE186A switch / check valve. 

Ok, will check that how many of those?

Ok, sorry for delay as dealers not willing to help. Old service dealer friend kept his micro film and I checked. Your casting number updates to P/N# 3QJ268P23

which then says there is a service note which I have no access. I will call around to see if anyone can update that number, which is a Dayton style wheel. Will advise.

Did you ever come up with part number of casting number on clamps? Rich

Go to the "Jacobs Vehicle Systems" website and search Model number of brake should be a service bulletin about external oil supply for that series I believe. 

Ok, will check it and get back to you. Rich

Front wheel, what is the casting number in the wheel. I.E. 3QJ 

316GC184 water pump part number

Ok, he did not have much, 

Sorry 

P/N# 16MF22AP1 CAP

P/N# 27RU217B BULLDOG

Lot off engine, transmission, brakes, gauges, door parts, but not there any more so don't have list anymore. 

Ok, wrote all the gasket part numbers down now just have to catch him at his place I will update you. Rich

No. 

No, nothing.

Camshaft and aux. shaft take same washer 701GC11A and 32AX65 pin, same guy might have these also. Again give me some time as he is not always around. Rich

Ok, give me some time I might be able to get most gaskets but I will get back to you. Rich

Do you have the transmission number stamped into main case 11KBA and or number of clutch that you need. Rich

Should be a number stamped into the nut at one end or the other. 

Clean truck. 

R615ST would have been an 864 engine.

F.Y.I. that is just the collar, bearing and collar separate. 46AX347 bearing ?? will double check book tonight. Rich

U606 is not a Maxidyne engine, should be a 250 HP