phildirt

2 - 72 inch chrome stacks. 5" inlet. Excellent shape.

Will bring to Macungie in June or Brownsville spring show.

$200

814 827 2626 or use pm

Here is a wiring diagram for my Able sleeper (1985 RW613)

Hope it is helpful

42 & 60 Mack Sleeper Wiring Harness.pdf

Yes-- you can use the solenoid on the 12/24. You still use the existing wiring to the starter switch and eliminate the 24v side.

40MT 12 volt starter. I used the upper solenoid of the 12-14 switch to engage the starter.

What truck?

Here is another wiring diagram--

Here is a link to the wiki section of this site with a wiring diagram for the series parallel switch:

http://www.bigmacktrucks.com/index.php?/tutorials/article/70-wiring-schematic-for-series-parallel-switch/

Most of the product sold at SLC are made in Ohio and New York state.

I have had excellent service from SLC. Most of the lights they sell are made in NW PA and NE OH.

John has always treated me very well.

The trailer is complete and is part of the display- complete with "sky cycle" replica and a HD motorcycle.

Lightweight too, only 2907 lbs, with clutch and air compressor, no oil, water, starter, fan or alternator

Here is the infromation on the TRT-72 triplex and the TRQ-730 Quadruplex transmissions. The manual is Form No. TS-442.

PAI is about your only choice.

http://www.paiindustries.com/

I have to miss Alexander this year- same weekend as Trucktoberfest in Allentown.

Farmall C, serial # 58049 (1950)

Good running tractor with wide front end, good tires front and back, 1 new rear wheel, 1 repaired rear wheel, 145 pound factory wheel weights both sides. All oil and filters new, valves ground, starter just rebuilt, good battery, good radiator. Oil pressure good hot and cold. Muffler, exhaust/ intake manifolds are new. PTO and hydraulics work. Gas tank flushed and sealed. Carburetor kit installed. Original owners manual.

Paint mostly gone, all rust is included in price (battery box bottom, seat box bottom). All sheet metal and emblems are there. 2 front and 1 rear light, 3 brush generator (need rewired).

$1800

Email for more pictures

Will deliver most anywhere at reasonable price.

Will Wingo

Titusville, PA

814-827-2626

Would you send your contact information via PM?

Thanks

Have a fire extinguisher ready.

There is more to it than just switching the batteries.

I send you a pm.

Phildirt

These are as close as you can get- about $160 per pair.

perlux driving lights.pdf

Here is what Mack says in the service manual:

t2090 service manual cover.pdf

t2090 specfications.pdf

There is an airline going to the puff limiter- plug it or put a valve on it.

Thanks for the help--

I don't think the thaw is coming that soon- that will be fine.

Thanks

I need the part # (Mack or PAI) for the 2 cables that keep the hood from going past vertical on an RW 613 SuperLiner.

Thanks