cgallamore

2007 ch 613

If it sets 2 days or 2 weeks, volts will be down to 11.4 volts

New batteries jan,2011 bulldog brand

Looks like an R model with a 285, looks rough

I thought the same .

I wound up with a box of paunchos from Ritchie bros. Auctions

Each is packaged smaller than a pack of cigs

Wet from the knees down, but worth it.

AAAAHHHH! the flatbeddin' life! gotta love it!................Mark

The rain, the snow, the hot, the cold, ahhh and the tarps are my favorite.

Crain mats on a butifull spring day, makes it all worth it !!!!!!!

I would bet money on a tire..

I like this

The 2000 460 has a power band between 1675 and 1725.

There is an extra 30 hp

That's why I say 18spd only

Don't know why Mack made an engine with such a narrow power band, and put tranies in that can't stay in the power band.

I have drove lots of 460, they don't pull like other Mack motors.

They are more like 71 series detroits

Slam your finger in the door, drive it like you want to blow it up.

If it has a ten speed , your screwed.

18 spd only, Gota keep the rpm's above 1650

Stated hospice last week, just trying to keep her comfortable.

Been home about 6 weeks now.

Talked to Mackpro a couple weeks ago,, he has been knee deep in MP8's all summer

It's only 10 miles from my house, if anyone wants me to look before you make a trip..

Has anyone heard from mark

636-208-2818

$2.30 mile as long as fuel in the Midwest stays below $4.00

Ain't no feeling like Petermobiling

X 10 IN A RAWHIDE.

Wonder if him and 386 went to brokeback mountain

Bigen, when you got to Lubbock, you were only about 70 miles from me. Trey

was actually in littlefield,tx.

he's like a little tornado that shows up every day, but when he misses a few day you know you better be close to a shelter when he comes back......

Find a tire store that spin balance with the tire/ wheel on the truck

had a 1996 ch613 350,doing that, chased it for 3 months, wound up being a piece of grit in the throttle servo.

if you use a air hose to blow out the floor, thats how i got it. after the second time, i vaced it

snuck outa salt lake a while back going to lubbock,tx.

across co. down threw nm. backroads all the way.

it was only 8'10" got away with it. but it was not worth the stress.

i pulled a dump trailer for several years, never hit anything, only turned over once.

its easier than you would think, trany mounted pumps dont viberate. if you forget pto, when it gets hot it can flow threw up/down vaulve. that series of events that led to that may have started an hour before.

its been 7 yrs. since i pulled a dump trailer, i still check my mirrors any time im comming up to an overpass.

just fixed a bounce in mine with shocks.

or should i say mackpro fixed it.

i have a 2007 ac 460, with 540,000 miles.

just wandering, how much money i need to have laid up for an inframe overhaul.

in this day, igot to be ready for something like that.

I just need to empty the fridge.Then could shut the truck off and shut the fridge off. and let the truck cool down alittle better. Might get another battery and put an inverter on it to run a fan to circulate air.Idk another week or so. then we'll be home.

good luck with the smell.

i was in texas last week, the lot lizzards were givin it out on credit just to get out of the heat.

It came off a U600 , so it has a small hole cut for the mirror arm , like new from what I can tell. Nice and bright paint. Im guessing the R and DM and Superliner might share the same visor

Free ,Plus the ride to get it. near Kenly , NC.

i am damn glad to see this.

one mack lover helping another, with no intrest of money.

renews my faith in america