Brian L Blaylock

Call Barry at Watts Mack he should have what you need 
 

I know I’m a long way from you but I still have the rear section for the TRT-722 that we communicated about on a Facebook post awhile back 

RIP Glenn we will all miss you and condolences to the family as well 

Happy Birthday Mean Green 

The 74 RS-700 that I drove back in the day had a Mark IV rooftop A/C unit

67RModel I think the gentleman that you are referring to is Dan Thomas from Medford Oregon 

I would check them out good and if everything seems in order such as all the lights work starts and runs builds and holds air I would grease it check all of the fluids change the fuel filters adjust the air pressure in the tires to about 50 psi and head home and enjoy the adventure 

Merry Christmas everyone 

I am in search of a ISX 565 Cummins take out to fit a 2007 CL Mack thanks in advance 

I saw this desk when I was at the ATHS office back in October it’s awesome 

Hey Mackaholic that’s a real good looking truck with that color scheme I’m wondering if that truck didn’t belong to MidEast truck and tractor out of East Canton Ohio 

Either set up works good don’t know what your plans are as for how much it’s going to be used but if I was buying new I would go with hydraulic but if I was looking for used I would go with a chain drive just because they are easier to find either one will need a power take off and a hydraulic will need a tank and pump and necessary hoses 

Like Terry said it sounds like the clutch is stuck this is fairly common if the truck has sat for a considerable amount of time 

I was there in about 2001 maybe I saw a different truck but a lot of things are similar including the V8 the lift axle and the interior 

No I looked at it in Madisonville Ky right after the man who built it had passed away and his widow had it for sale 

When I saw this truck in person there was also two blue and white Kenworths with KT Cummins one had a air lift third axle the other one didn’t 

I saw that truck in person in the early 2000’s do you know what happened to the two matching Kenworths with KT Cummins in them 

Was this truck built by a man in Madisonville Ky

This truck belongs to a friend of mine and it’s still in daily use and he said he could get it recored but he said it would take 3 months and he needs the truck but if any one knows of a radiator shop with a quicker turn around time please let me know 

I’m looking for a radiator for a 1990 Superliner with a E-7 400 and air ride cab thanks Brian 

There was a Mack trailer at the 2022 ATHS show in Springfield Il

Congratulations to both of you 

If your air pressure drops during braking it’s more than likely you have a bad brake chamber 

Paul both of the lines were disconnected at the tank valve area I’m trying to figure out how to hook them up correctly