Jump to content

DodgeMan

Bulldog
 View Profile  See their activity

  • Posts

    470

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by DodgeMan

  1. DodgeMan
    Poor thing needs to be shot and put out of its misery
  2. DodgeMan
    I seen a few vids on YouTube of a actual jake brake (not a exhaust brake) for a dodge 12 valve... Anyone got any info???
  3. DodgeMan
    Cross member installed...
  4. DodgeMan
    Same as most b models. Not sure on the others...
  5. DodgeMan
    Cross member cleaned up. Also installed tonight. Will get pics of that tomorrow.
  6. DodgeMan
    Plan to... After about 6hrs of tweeting yanking cutting welds apart and rewelding the rails are pretty dang straight. Will post pics tomorrow. -->Also decided to add a cross member. So another delay but I as well as my dad think 6-7ft between members was a bit to much. (Thanks for the idea dad.) lol not sure how I'd get half this stuff back together and running with out him... :-)
  7. DodgeMan
    Getting closer to getting all the pieces put back together!!!
  8. DodgeMan
    I got donor rails from a truck that was being scraped. The inner rails are now tacked in place. Going to get everything leveled and tie the pieces together to get a rolling frame again... As promised 2 pics of the 54 packard panama super clipper...
  9. DodgeMan
    54 packard super clipper. I'll post a pic latter. And I should say the rat rod I'm building as well that's packard powered. And thanks for the help.
  10. DodgeMan
    Moving along slowly on this project due to above problem and working on my dads 54 packard.
  11. DodgeMan
    pics of stretch
  12. DodgeMan
    Frame rail dimension issues. On the inside of the rail at the cross member that the cab sits on I got 26 1/2 inches and at the rear section in front of the 3rd rail I got 27 inches.
  13. DodgeMan
    Anyone got any holley 94 carbs laying around?? I could use ones with model 59 on the side or let me know what you have.... Thanks Paul Building a rat rod on the side when i dont have enuff time to be working on the B81.....
  14. DodgeMan
    3/4 inch torque wrench works sweet
  15. DodgeMan
    The 2nd and 3rd pic in this set show the grade 8 bolts instaled and torqued to 325ft lbs... Next week im going to start adding the 4ft section of strech, will post pics as i go.
  16. DodgeMan
    (((((BACK ON THE PROJECT))))) Got a reamer. It was a reverse spiral. Kimble Midwest ($173.00) has them but i bought a new one cheaper on ebay ($55.00).
  17. DodgeMan
    What engine is in the truck?
  18. DodgeMan
    Yup that be the beast. Pretty much everyone said I should leave it as is. There where a few that said I should fix it all up. Thinking I'm just going to put the parts aside I have a leave it alone for now.
  19. DodgeMan
    Well the ljswx made its first appearance at the truck show. I should post a pole on here. To keep it the way it is or to restore it lol.
  20. DodgeMan
    I won't Mack it Friday. But sat I will be there with one rusty Mack. It looks like hell but still runs great. Seeyas there Paul
  21. DodgeMan
    Found the problem the slack adjuster is broke. Have 2 new ones on the way. Good price from napa.
  22. DodgeMan
    I'm working on my ljswx. Both passenger side wheels will turn when they are jacked up and off the ground. But only the front drivers side set will turn . I can't get the rear set of tandems to spin on that side. I checked the brakes and there ok. Any ideas... Thanks Paul
  23. DodgeMan
    Will call you this weekend some time.
  24. DodgeMan
    Anyone know how to get this wire connection apart?
  25. DodgeMan
    Here's what I'm working with.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...