mackey58

Ahhh

Is it a extend a hoe or normal boom on thr back

Yea but our cv ain't boss is wacko 

But under the hood

That's what I said asi walked in the shop and saw that going down

Last time it took a week to get injectors the "hired mechanic not ours put it back together and had to either it to get it to start #6 injector was oil soaked when it too it out imo I think it needs an overhaul and freshed up  but that's me 

Joey you can't make this stuff up.i told the mechanic well I ll have rain days off cause the water is hard on the engine 

Penny wise,pound foolish lol

Yep it's an 01 bought new ,spent more on electric brakes over the years they probably could have bought  a new tri axle tag

One tag is 20k electric  brakes (sucks) the 40k is a 19'deck 5' beaver tail air brake 20k is 20'deck5' beaver tail.so they ll ,fxxk up the RD with an electric brake controller. Whee

Thanks for your input

They do stuff and don't ask us with  33 years experience. They ask guys with no cdl or one with an auto endorsement 

They should have got a 35t lowboy as a backup we have a 50 ft and lowboy tractor. We don't have anything big anymore except a jd 290 

There kinda goofy some days

They want to use both tags,when the 50 ton lowboy is busy

Damn spell check. Pintle hook

So they got an idea about putting a pintle hook on the RD to pull the tag trailers. Is that a good idea?all the weight will be on the pintle,not on the fifth wheel.moving a 35k excavator when the lowboy is busy.any thoughts?

That's the norm anymore,no quality to last.

Plug good,switch good,new resistor and  changed blower motor is what out mechanic did

Tks joey tearing it apart tomorrow 

The blower quit today I have no speeds is this changeable or do I have to order that whole plate.i ain't tore into it yet.

I ll check when I get it back

Hey I'm kinda used to it but#1 driver drove the 90RDand was bitching they drivers side vibrates. Is there factory (lol from Volvo they won't find them)washers or bushings  for them the passenger side don't vibrates and drivers side is tight

Barry,I hope you have good luck.a few years back when it was Joliet mack the parts guy looked it up.and on his screen it no longer available the end of an era.i hope you get to make those I need one